Abel's Exorcist Commander Helmet with Swappable Faceplates and Modular Horns Inspired From Hazbin Hotel

[TL;DR:
- A custom‑sized, 3D‑printed Abel's Exorcist Commander Helmet inspired by Hazbin Hotel.
- Includes the option for multiple faceplate for different expressions.
- Helmet style padding included in package, REQUIRES user to install.
- Pre‑assembled (but unattached) halo for safe shipping.
- Neck strap design for stability, motorcycle‑style interior fit.
- Padding recommended to prevent sliding.
- Updated Measurements for Head Circumference and sizing split into groups.
- Fully customizable—I'm the original designer and can modify the helmet to your needs.]

Design inspired by reference images from "FernForge3D, CosPlayWigPOL, Adams's Fandom.com, NiuBIYo, various motorcycle helmets & input from various Clients and Commissioners ". Credit to them for visual material that helped guide the modeling process. NO AI was used in the concept nor design process of this Item:

📁 Want the 3D File? Download the FREE .stl file from my profiles on Printables and Maker World:
Printables: https://www.printables.com/@DeMambaPrints_297618/models
Maker World: https://makerworld.com/en/models/2807518-adam-s-exorcist-commander-helmet-from-hazbin-hotel#profileId-3124323

🛠️ Product Description:
This Helmet is 3D printed using Polylactic Acid (PLA) and are original designs inspired by characters from Amazon Prime Video's Hazbin Hotel. Each mask is made to order and crafted with care.

🧑🏻Head Sizing Guide:
To ensure the best fit for your helmet or mask, measuring your head circumference accurately is essential. Follow these steps:

1. Use a flexible measuring tape (or a piece of string if you don’t have one).
Position the tape just above your eyebrows and ears.
2. Wrap it around the back of your head at the point where your head slopes upward prominently from your neck. This is usually the widest part of your head.
3. Make sure the tape is snug but not tight, and that it stays level all around your head.
5. If you used a string, mark the length where it meets, then measure that length with a ruler or measuring tape.

Important:

Always measure the largest circumference of your head to get an accurate size.
If your measurement falls between two sizes (for example, 23.25 inches), round up to the next size (in this case, 24 inches).
There is no need to add extra size for padding; our helmets and masks are designed with padding included. Order the size that matches your measurement for the best fit.

🗘Swappable Faceplates:
This Helmet includes Swappable Faceplates with different and various expressions to change the emotion of the mask. This is done via magnets on the inside of each faceplate and magnets attacked the Helmet and Jaw Piece. The various facial expressions can be viewed on the listings provided images and a multitude can be purchased at once.

🎨 Colored RAW 3D Print:
This version is printed in Multiple colors directly off the build plate. Expect a raw finish with visible layer lines and minor surface imperfections, that are not visible from a 10ft distance. Perfect for DIY finishing or display as-is.

📦Included with each RAW print:

🧽 Padding Included (User‑Installed)
-Soft padding is included but not pre‑installed. This allows you to place it exactly where you need it for comfort, stability, and to avoid hair pulling or bald spots. Every head is different—your padding should be too.

😇 Halo Included & Pre‑Assembled (But Not Attached)
The halo is fully assembled before shipping but left unattached to prevent damage during transit.

-Simply slide the halo rod into the top slot for casual wear.

-For a permanent bond, add a small amount of glue to the hole before inserting the rod.
This part is delicate, so this method ensures it arrives safely.

🔒 Strap Placement for Stability
-The helmet strap is intentionally designed to fasten behind the neck, not under the chin.
Because the helmet is back‑weighted (true to the design), this placement keeps it secure and prevents tipping.

🛡 Padding Recommended for Stability
Applying the included padding helps prevent lateral sliding and keeps the helmet centered while worn—especially important for long cosplay sessions.

🏍 Motorcycle‑Inspired Interior Fit
The helmet’s internal structure is modeled after motorcycle helmet ergonomics for improved comfort and stability.

Print Specs:
Layer height: 2.0mm
Infill: 8% (Gyroid pattern)
Nozzle: 0.4mm
Typical colors: Black, White, Light Grey, and Transparent

🎨 Custom Modifications Available
As the original designer of this helmet, I can modify the model to match your preferences—adjustments, tweaks, or personalized details. I’m flexible and happy to accommodate your cosplay needs.

📦 Shipping & Returns
All masks are made to order
Free shipping within the USA

Returns accepted—just contact me first and return the item

⚠️ Legal Notice This is a fan-made item and not officially licensed merchandise. It is 3D printed and assembled by me as a tribute to the original characters. Fan art is protected under Fair Use. If you have any concerns, please reach out before filing a report.

Design inspired by reference images from "FernForge3D, CosPlayWigPOL, Adams's Fandom.com, NiuBIYo, various motorcycle helmets & input from various Clients and Commissioners ". Credit to them for visual material that helped guide the modeling process. NO AI was used in the concept nor design process of this Item.