Lounge Set Plans | DIY Chair and Coffee Table PDF Imperial and Metric | 3D Model

📥 Digital download. Two PDF files (imperial + metric) plus a SketchUp 3D model you can spin and inspect in the free SketchUp mobile app. No physical item ships. Download via desktop or mobile browser, not the Etsy app.

Build a pair of reclined lounge chairs and a low slatted coffee table from standard 4x4, 2x6, 2x4 and 2x2 lumber. The chairs sit low with a 25 degree back and a deep seat, comfortable without a cushion. All the frame joints use pocket screws driven from the inside, so no screw heads show on the outside of the chair.

DIMENSIONS
Chair: 30⅛ x 34 x 37¾ in / 76 x 86 x 96 cm
Chair footprint on the ground: 30⅛ x 31 in / 76 x 79 cm
Table: 44 x 23⅛ x 15 in / 112 x 59 x 38 cm
Seat height: 16 in front, 14⅞ in back / 41 cm front, 38 cm back
Seat: 23⅛ in wide, 22 in usable depth / 59 cm wide, 56 cm deep
Arm height: 25 in / 64 cm
Backrest angle: 25 degrees from vertical
Weight: ~65 lb per chair, ~45 lb table / ~30 kg, ~20 kg
Wood: any durable exterior species, cut list uses nominal sizes
Skill level: intermediate
Build time: one weekend (about 2½ hours per chair, 1½ for the table, plus cutting and finishing)

WHAT'S INCLUDED
✅ Two PDFs, imperial and metric, 22 pages each
✅ SketchUp 3D model file, opens in the free SketchUp app on phone, tablet or desktop
✅ 12 build steps, each with a 3D diagram showing exactly what to add
✅ Full cut list, 17 parts with lengths and shapes drawn to scale
✅ Lumber yard list with board counts for the whole set
✅ Hardware list with screw sizes and where each one goes
✅ Complete dimensions for both the chair and the table
✅ Instructions for the 25 degree angled cuts on the seat and back boards
✅ Pocket hole positions marked at every frame joint
✅ A checklist and common mistakes at the end of every step
✅ Finishing guide comparing three penetrating oils
✅ Care schedule for the first year and every year after

PERFECT FOR
✅ Patios, decks, gravel courtyards and covered porches
✅ Fire pit seating
✅ Sitting outside without a cushion
✅ Weekend builders with a mitre saw, a drill and a pocket hole jig
✅ Learning pocket hole joinery on a real project
✅ Cedar, cypress, teak, white oak or any durable exterior wood
✅ Building two chairs or six, the plan is the same
✅ Builders who work in metric or imperial

HOW TO DOWNLOAD
Purchase → check "Purchases and Reviews" in your Etsy account → click Download. Digital files cannot be downloaded via the Etsy app. Use a mobile browser or desktop.
If anything is unclear, message me on Etsy. I answer every message and will help you finish the build.