Christmas Candle Holder STL/3MF Bundle | 3D Printable Santa Bundle (9 Files)

⚠️ This is a DIGITAL DOWNLOAD STL file. No physical product will be shipped.

🎄 Christmas Candle Holder STL + 3MF Bundle — 3D Printable Cute Christmas Character Tealight & Bowl Stand Set of 9 | Santa, Penguin, Snowman, Reindeer, Elf, Gingerbread, Polar Bear, Gnome & Christmas Tree | 70–80mm | Instant Download

Light up Christmas with the most adorable festive display you've ever printed — this charming set of 9 Christmas character tealight and candy bowl holder STL and 3MF files. Each character is seated with both arms raised above their head holding a wide round bowl — use as a tealight candle stand, a mini candy bowl, a trinket dish or a festive shelf display piece. The complete Christmas cast: Santa, penguin, snowman, Rudolph, elf, gingerbread man, polar bear, gnome and a Christmas tree — all bursting with Christmas personality.

🎄 What's Included — 9 Individual STL + 3MF Files

• 1. Christmas Penguin Holder — adorable kawaii penguin with a red knit Santa hat with white brim and pink pom-pom, red and white striped knit scarf, rosy blushing cheeks, yellow beak, yellow webbed feet, both arms raised holding red round bowl | Height: ~80mm

• 2. Santa Claus Holder — jolly sitting Santa with full fluffy white beard, round rosy cheeks, red Christmas suit, gold belt buckle detail, black boots, happy closed-eye smile, both arms raised holding red round bowl | Height: ~70mm

• 3. Snowman Holder — cheerful sitting snowman with classic black top hat featuring holly and berry decoration, orange carrot nose, black coal button row down the chest, red knit scarf, rosy cheeks, both arms raised holding black round bowl | Height: ~70mm

• 4. Reindeer / Rudolph Holder — cute brown reindeer with detailed branching antlers, glowing red Rudolph nose, red knit scarf with a gold jingle bell, big round eyes, rosy cheeks, both arms raised holding brown round bowl | Height: ~70mm

• 5. Christmas Elf Holder — cheerful elf in a green costume with a pointy red and green hat, large pointed ears, candy-cane-striped stockings, gold belt buckle, happy smiling expression, both arms raised holding green round bowl | Height: 80mm

• 6. Gingerbread Man Holder — sweet gingerbread man with royal icing swirl details on body, red bow tie, round rosy cheeks, happy smiling face, green button detail, both arms raised holding brown round bowl | Height: ~70mm

• 7. Polar Bear Holder — fluffy white polar bear with round ears, black button nose, rosy blushing cheeks, detailed paw pads, cosy red knit scarf, both arms raised holding white round bowl | Height: ~70mm

• 8. Christmas Gnome Holder — charming gnome with an oversized pointed red hat decorated with a snowflake emboss, long flowing white beard, black boots barely visible under the hat, both arms raised holding red round bowl | Height: ~70mm

• 9. Christmas Tree Bowl Holder — adorable smiling Christmas tree character with layered branch tips, gold star on top, red round ornament baubles, gold tinsel garland swoop, happy smiling face, both arms raised holding green round bowl | Height: 70mm

• Bowl on all 9 is sized for standard tealight candles — also use as candy bowl, trinket dish or seasonal display bowl
• Instant digital download after purchase
• Compatible with Cura, PrusaSlicer, Bambu Studio & all major FDM slicers
• Personal use licence included

📋 Complete File & Technical Specifications
• File Format: STL and 3MF
• File Count: 18 including 9 individual STL AND 9 individual 3MFfiles
• Franchise: Original design — not affiliated with any franchise or licensed IP
• Design Feature: 9 unique Christmas character tealight and bowl holders — seated characters with raised arms holding wide round bowl; penguin, Santa, snowman, reindeer, elf, gingerbread man, polar bear, gnome and Christmas tree; 70–80mm height range
• Scale: Full display and functional size — 70mm to 80mm height each

• Support Status: ⚠️ Supports required — raised arms and bowl underside on all 9; reindeer antlers most critical; scarf ends, hat brims, antlers, beard, garland, star and bauble details all need supports
⚠️ Supports required — key areas per holder:

• All 9 — Raised arms + bowl underside — both arms raised holding bowl have underside overhangs; tree supports under both arm undersides and bowl underside rim on every holder

• Penguin — knit hat pom-pom ball on top; hat brim overhang; scarf end tails hang down; yellow feet webbing

• Santa — white beard overhang below face; Santa hat brim and tip; black boot toe overhangs

• Snowman — top hat brim overhang; holly leaf and berry detail; carrot nose horizontal protrusion

• Reindeer — antler branches overhang in multiple directions — most complex support area in this bundle; tree supports under all antler branch undersides; gold bell protrusion

• Elf — pointy hat tip and collar points; pointed ear tips; candy cane striped stocking detail

• Gingerbread Man — icing swirl detail surface; bow tie protrusion; gingerbread body edges

• Polar Bear — round ear tips; knit scarf end tails; paw pad detail underside

• Gnome — large oversized pointed hat tip; snowflake emboss on hat; long beard overhang below hat

• Christmas Tree — gold star top tip; bauble ornament protrusions; garland swoop overhang; layered branch tips

Recommended settings: Tree supports | Contact Z: 0.2mm | Angle: 45° | Interface ON | ⚠️ Reindeer antlers are the most critical support area — ensure full branch underside coverage

• Usage Rights: Personal use licence — personal display only; commercial licence required for selling
• Download Method: Instant digital download from Etsy Downloads page after purchase
• Recommended Layer Height: 0.1–0.15mm for best knit texture, beard, antler and character detail
• Recommended Infill: 15–20%
• Recommended Nozzle: 0.4mm standard; 0.2mm for finest knit and scarf detail
• Compatibility: All FDM printers — Cura, PrusaSlicer, Bambu Studio

⚠️DISCLAIMER:
3MF FILES AND SCALING SIZE WOULD DEFINITLY INCREASE BOTH FILAMENT AND TIME.

📐 Size & Filament Details FOR STL FILES ONLY (SINGLE COLOR)

• Christmas penguin: 80mm | ~28–30g | 1.5–2 hrs
• Santa Claus: 70 mm | ~22–24g | 1–1.5 hrs
• Snowman: ~70mm | ~20–22g | 1.4–1.5 hrs
• Reindeer/Rudolph: ~70mm | ~18–20g | 1–1.5 hrs
• Christmas elf: 80mm | 23–28g | 1–1.6 hrs
• Gingerbread man: ~70mm | ~20–25g | 1.3–1.5 hrs
• Polar bear: 70mm | ~21–26g | 1.3–2.5 hrs
• Christmas gnome: ~70mm | ~24–26g | 1.4–1.6 hrs
• Christmas tree: 70mm | ~24–26g | 1.5–1.9 hrs
• ⚠️ PETG strongly recommended if using with real tealight candles
• Filament estimates based on 15% infill with tree supports — always slice for accurate results

✨ Design Features
• 9 unique Christmas characters — the complete Christmas cast in one download
• Every character seated with arms raised holding a matching colored round bowl
• Penguin: red knit Santa hat, striped scarf, pom-pom — the hero character and showstopper of the set
• Santa: full white beard, rosy cheeks, gold belt buckle — classic and instantly recognisable
• Snowman: top hat with holly, carrot nose, coal buttons — a charming classic Christmas character
• Reindeer: Rudolph red nose, branching antlers, gold jingle bell — the most detailed piece in the bundle
• Elf: pointy ears, candy cane stockings, green hat — a charming Christmas helper
• Gingerbread man: icing swirl body, bow tie — a cosy Christmas baking character
• Polar bear: fluffy ears, paw pads, red scarf — adorable and irresistibly cute
• Gnome: oversized snowflake hat, flowing beard — the most Nordic/hygge character of the set
• Christmas tree: star, baubles, garland — a completely unique character concept
• Each piece is single-colored — no separate color parts or layers

⚙️ Recommended Print Settings
• Layer height: 0.1–0.15mm for best knit, beard, antler and character detail
• Infill: 15–20%
• Nozzle: 0.4mm standard; 0.2mm for finest knit texture and scarf detail
• Supports: ✅ Required — see full support guide above
— All 9: tree supports under raised arm undersides and bowl underside rim
— Reindeer: tree supports under all antler branch undersides (most critical)
— Santa: supports under white beard overhang and hat tip
— Snowman: bridge support under carrot nose; supports under hat brim and holly
— Penguin: supports under hat pom-pom and scarf tails
— Christmas tree: supports under star tip, bauble protrusions and garland swoop
— Gnome: supports under hat tip and beard overhang
• Recommended: Tree supports | Contact Z: 0.2mm | Angle: 45° | Interface ON
• Material: ⚠️ PETG if using with real candles; PLA for flameless LED or display/bowl use only
• Print each in matching character color for authentic look — or any single color for a Scandi minimalist Christmas display

🎁 Perfect For
• Christmas mantel, shelf and tiered tray candle and decor display
• Festive candy, trinket and seasonal bowl display
• Christmas gift for her — Christmas decor lover and 3D printing enthusiast
• Christmas party table centrepiece arrangement
• Secret Santa and stocking filler gift
• Kids Christmas display and festive room decoration
• 3D printing hobbyists who love cute detailed festive character figurines

💡 Why You'll Love This Bundle
• 9 complete Christmas characters — the whole festive cast in one download
• Penguin with knit Santa hat and striped scarf is the standout hero character
• Reindeer antlers make it the most detailed and impressive piece in the set
• Christmas tree as a character is a completely original and unique concept
• Multi-use bowl — tealight holder, candy dish, trinket bowl or display piece
• Exceptional value — 9 premium Christmas character holder STL and 3MF files in one instant download

Once your purchase is complete, all 9 files are available from your Etsy Downloads page. Questions about PETG vs PLA for candle safety, reindeer antler supports, scaling or filament color? Message me — happy to help! 🎄

——
⚠️ DIGITAL FILE ONLY — These are STL and 3MF files for 3D printing. No physical items will be shipped. A 3D printer and filament are required to produce the items shown.

⚠️ DISCLAIMER:
• This is a digital STL + 3MF files bundle — no physical items will be sent
• Colors shown in preview images are for visualization purposes only — actual appearance depends on filament color chosen
• Red Santa suit, white beard, black penguin body, red knit hat, orange carrot nose, gold jingle bell, striped elf stockings, icing gingerbread detail, gold Christmas tree garland and all character colors shown in images are visual representations — actual appearance depends on filament color and painting chosen
• ⚠️ CANDLE SAFETY — if using with real tealight candles, print in PETG; PLA is not heat resistant near open flames — use flameless LED tealights with PLA prints
• Candles, candy, Christmas decorations, pine cones, gifts and background props shown in images are not included — holders only
• Supports ARE required for all 9 models — reindeer antlers are the most critical support area in this bundle
• Usage rights: personal use licence only — printed pieces may not be sold without a separate commercial licence
• Filament and print time estimates are approximate and will vary based on slicer settings, infill, supports and printer model