Price:$27.99
Dual 3.5 HDD Shelf - 10 Inch Rack Mount | 1U SATA Drive Tray | Black PETG
Your order should arrive by this date if you buy today. To calculate an estimated delivery date you can count on, we look at things like the carrier's latest transit times, the seller's processing time and shipping history, and where the order is shipping to and from.
Returns & exchanges accepted
You can only make an offer when buying a single item
Highlights
Mount two bare 3.5-inch SATA hard drives side by side in a compact 10-inch rack. This black PETG shelf combines a honeycomb front, reinforced drive trays and open rear access for SATA data and power cables. Drives are not included.
• Two 3.5-inch HDD positions in a 10-inch, 1U rack mount
• One-piece shelf with reinforced side supports and center divider
• Honeycomb front and ventilation slots beneath each drive
• Bottom screw mounting keeps each drive secured to its tray
• Printed shelf dimensions: 254 × 148 × 43 mm (width × depth × height)
• Designed for bare drives up to 101.85 × 147 × 26.11 mm
Includes one physical 3D-printed shelf in black PETG. Hard drives, drive screws, rack screws, cage nuts, SATA cables and rack are not included. Installed-drive photos show use only.
INSTALLATION
Install drives from above and fasten from underneath before fitting the shelf to the rack. Use four matching bottom mounting positions per drive. Required drive screws: #6-32 UNC × 3/16-inch plain pan head, without added washers (not included). Do not use 1/4-inch screws: they extend too far through this shelf. Check your drive manufacturer's insertion limits and confirm the drive sits flat before gently tightening by hand.
Use all four rack mounting positions and leave room behind the shelf for connectors and cable bends. For 10-inch equipment racks, not 19-inch rack spacing. This is a fixed shelf, not a hot-swap enclosure; no electronics or backplane are supplied. Provide airflow suitable for your drives.
Small layer lines and surface variations are normal with 3D-printed parts. Printed by 3DStore.ai.
-
Order today to get by Sep 23-29
Your order should arrive by this date if you buy today. To calculate an estimated delivery date you can count on, we look at things like the carrier's latest transit times, the seller's processing time and shipping history, and where the order is shipping to and from.
-
Returns & exchanges accepted within 30 days
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
-
Free shipping
-
Ships from: Kansas City, MO
There was a problem calculating your shipping. Please try again.
Etsy Purchase Protection
Shop confidently on Etsy knowing if something goes wrong with an order, we've got your back for all eligible purchases —
see program terms
Be the first to review this item
More from this shop
Visit shop-
Raspberry Pi 5 Rack Mount - 10 Inch 1U, Single or Dual Pi, Keystone Option
$23.99
-
Dual 2.5-Inch SSD HDD Rack Mount | 10-Inch 1U | Closed Front | Black PETG
$24.99
-
120mm Fan Mount for 10-Inch Racks | 3U Honeycomb Panel | Black PETG
$15.99
-
Dell OptiPlex Micro 3000 5000 7000 10-Inch 1U Rack Mount | Keystone Options
$27.99
Disclaimer: Etsy assumes no responsibility for the accuracy, labeling, or content of sellers' listings and products. Electrical or electronic products may pose a risk of fire or electrocution. Vintage, handmade, refurbished, or modified electrical or electronic products may not meet current safety standards and may not be in safe working order. Inspect carefully before use and message the seller if you have concerns relating to the product. Do not use a vintage electrical or electronic item if its safety cannot be verified. To reduce the risk of fire, never leave vintage electrical or electronic products plugged in unattended. See Etsy's Terms of Use for more information.