Report this item to Etsy

Raised Garden Bed Plans Made to Your Size, 2x6 Planter Box with Cut List

Price:$9.90

Loading
Includes Etsy Purchase Protection

You can only make an offer when buying a single item

Highlights

  • Designed by BuildToSizePlans
  • Supplies for making crafts
  • Digital download
  • Digital file type(s): 2 PDF, 1 TXT, 1 ZIP

A rectangular raised bed from stacked boards screwed to corner posts, with an optional flat cap rail as trim. It has no bottom: the posts run below the bottom board into the ground by the stake length you choose (or none, to sit on a hard surface); a middle post is added to each long side once the bed is longer than the threshold the sheet uses (1500 mm as it ships, 1000 mm at three courses or more). The spreadsheet also estimates the soil to fill it. Screws only, no special joinery. Tools: a circular saw or hand saw, drill/driver, square, a level, and a spade or post-hole digger for the post holes.

This is a digital download. No physical item is shipped.

The photo of the planted bed on a lawn is an AI-generated visualisation at the default size, drawn from this plan's own drawings; it is not a photograph of a built example, and no example has been built. The step-by-step build pictures and the short build video are technical renders drawn by software from this plan's own part sizes at the default size; they are not photographs and not AI images. Every other photo shows the actual files you receive.

WHAT YOU GET (4 files)
- cut-list-kit.zip: the spreadsheet cutlist-calculator.xlsx plus copies of the two PDFs and the parts list as parts.csv (Etsy does not accept spreadsheet uploads directly, so it comes zipped; unzip it on a computer). In the spreadsheet you type your sizes, your board sizes and your local prices; it recalculates every part, a cutting plan that allows for saw kerf (which part comes from which board), how many boards to buy, the hardware counts and the timber cost.
- plan.pdf: dimensioned drawings, a layout with the position of every part, a joint detail with screw lengths, the cut list for the default size, 10 build steps and the hardware list.
- cutting-diagram.pdf: the cutting plan drawn for the default size: 8 x 2x6 boards, 2440 mm (96 in) long, 140 mm (5 1/2 in) x 38 mm (1 1/2 in); 2 x 4x4 posts, 2440 mm (96 in) long, 89 mm (3 1/2 in) x 89 mm (3 1/2 in).
- parts.txt: the cut list for the default size as plain text for your phone at the timber yard.

DEFAULT SIZE (the drawings and the cutting diagram)
bed length 1800 mm (70 7/8 in); bed width 900 mm (35 7/16 in); courses: 2; cap rail on top: yes; cap overhang beyond the outside of the boards 0 mm (0 in); post extension below the bottom board 150 mm (5 7/8 in). The sheet ships in mm; switched to inches it starts from its own round inch defaults (bed length 72 in; bed width 36 in; cap overhang beyond the outside of the boards 0 in; post extension below the bottom board 6 in) and recalculates from there.

SIZES YOU CAN TYPE
bed length, outside of the boards = 900 to 2440 mm (36 to 96 in); bed width, outside of the boards = 600 to 1220 mm (24 to 48 in); courses: boards stacked on each side = 1 to 4; cap rail on top (1 = yes, 0 = no) = yes or no; cap overhang beyond the outside of the boards = 0 to 40 mm (0 to 1 1/2 in); post extension below the bottom board, set into the ground = 0 to 600 mm (0 to 24 in). Metric or imperial. Enter your real board sizes and the plan adapts. Parts too long for your stock are flagged by name, never hidden.

HOW TALL IT CAN BE
The height is not a field you type: the wall height is the number of courses times the width of the board you enter. With 140 mm (5 1/2 in) boards, 1 to 4 courses gives 140, 280, 420 or 560 mm (5 1/2, 11, 16 1/2 or 22 in) of wall, and a cap rail adds one board thickness on top, so four courses with 38 mm (1 1/2 in) boards comes out at 598 mm (23 9/16 in) overall. Type the real width of the boards you buy and the sheet gives you the exact height, the post length including whatever you set into the ground, and the board count.

OPENING THE SPREADSHEET
No macros. Tested in LibreOffice and Apple Numbers.

GOOD TO KNOW
- The cutting plan is a good plan, not a guaranteed minimum.
- Hardware (exterior board screws, exterior cap screws, exterior wood glue (optional)) is counted, not priced.
- Not computed by the spreadsheet:
- Wood grain direction, knots, warp, rot or other defects in your stock, and how long any timber lasts in contact with soil.
- Trimming factory ends or edges beyond the saw kerf you enter.
- Board-feet: boards and posts are counted as whole pieces.
- How to dig the post holes, level the ground or drain under the bed (the steps say where the holes go, not how to dig them).
- The soil volume is a plain box to the top board: settling and compaction are not included.
- This is a plan for a garden planter. It makes no load, weight, soil-pressure or strength rating of any kind. Never stand, sit, lean or climb on the boards, posts or cap (the cap rail is a trim, not a seat or a step), and assemble the bed where it will stay. Choose timber and any finish that suit what you plan to grow. Check every part against the cut list before assembly.

Created with the help of AI tools: the design, spreadsheet, drawings and text were developed with AI assistance. The spreadsheet was checked with automated tests in LibreOffice and Apple Numbers.

Because this is a digital download, returns are not accepted. If a file will not open or something looks wrong, send me a message and I will help.

Instant Download

Your files will be available to download once payment is confirmed.  Here's how.

Instant download items don’t accept returns, exchanges or cancellations. Please contact the seller about any problems with your order.

Etsy Purchase Protection
Shop confidently on Etsy knowing if something goes wrong with an order, we've got your back for all eligible purchases — see program terms

You may also like

Disclaimer: Etsy assumes no responsibility for the accuracy, labeling, or content of sellers' listings and products. Electrical or electronic products may pose a risk of fire or electrocution. Vintage, handmade, refurbished, or modified electrical or electronic products may not meet current safety standards and may not be in safe working order. Inspect carefully before use and message the seller if you have concerns relating to the product. Do not use a vintage electrical or electronic item if its safety cannot be verified. To reduce the risk of fire, never leave vintage electrical or electronic products plugged in unattended. See Etsy's Terms of Use for more information.

Shoppers with similar taste loved these

Show more
Show more
Listed on Sep 21, 2026