Bait Boat Monitor Mount for Carplounge AIO Controller, Winchcam Underwater Camera Holder

Mount the monitor of your underwater camera directly on your Carplounge AIO controller. No more balancing a separate screen on your knee or a bank stick while you steer the bait boat and watch the bottom: the monitor sits right above your hands, tilted towards you, and the whole set stays one unit.

Available for the monitor of the Carplounge Winchcam and for the monitor of the Stealthcam UK Winchcam underwater camera.

This holder clicks onto the controller without drilling, screws or tape, and the monitor clicks into the holder. Designed, test-fitted and improved on a real AIO controller and both monitors over several rounds of prints.

Features:

Fits the Carplounge AIO (All-in-One) bait boat controller
Holds your Winchcam underwater camera monitor, so you see the camera image while you steer
Tool-free: the frame clicks over the top and bottom edge of the controller
Monitor tilted 15 degrees towards you for a clear view
Monitor snaps into the holder with spring clips, easy to take out again
Antenna connectors and side ports stay free, so you can plug in while mounted
Leaves room for the folding antenna on the back of the controller
Recesses for the mounting plate and nut underneath the controller, nothing presses on it
Two-part design: screen holder and frame click together with spring arms, so you can swap screens and keep the same frame
Rounded edges all around, nothing sharp in your hands

Choose your monitor when ordering:

Carplounge Winchcam: for the 7 inch monitor that comes with the Carplounge Winchcam underwater camera (Boscam RX-LCD5802 type, with the fixed sun visor)
Stealthcam UK Winchcam: for the 5 inch monitor of the Stealthcam UK Winchcam underwater camera (Eachine 5 inch type)

Bundle deal: add a matching anti-spinner and save 10.50 euro

Choose the option Holder + matching anti-spinner and you get the holder together with an anti-spinner for the same camera for 59.95 euro, 10.50 euro less than buying them separately. The anti-spinner clicks around your underwater camera and stops it from spinning on its cable, so the camera image stays pointed in one direction while you search the bottom. It is made for the camera you selected above: the Carplounge Winchcam camera or the Stealthcam UK Winchcam camera.

PLEASE NOTE for the Stealthcam UK Winchcam: the anti-spinner in the bundle only fits the 63 mm long version of the Stealthcam camera (body 34 mm, 4 mm cable). Measure your camera from the lens to the back, without the cable. Is your camera not 63 mm long? Please send me a message before you order the bundle.

What you get:

1 screen holder for the monitor of your choice
1 clamp frame for the AIO controller
1 anti-spinner for your camera, if you choose the bundle (Stealthcam: 63 mm version only)

The controller, monitor, underwater camera and antennas are not included.

Size (approx.):

Clamp frame: 190 x 165 x 55 mm
Screen holder Carplounge Winchcam: 202 x 151 x 28 mm
Screen holder Stealthcam UK Winchcam: 202 x 117 x 26 mm

Made to order and shipped from the Netherlands with PostNL track and trace.

Have a different monitor or camera? Send me a message with its measurements, the design is parametric and can often be adapted.

This is an independently designed accessory. It is not made or endorsed by Carplounge, Stealthcam UK, Boscam or Eachine. Brand names are only used to describe compatibility.