Underwater Fishing Camera Anti-Spin Fin, Winchcam Stabilizer for Carplounge or Stealthcam UK Bait Boat

Stop your underwater camera from spinning on its cable. This anti-spinner clicks around your Winchcam camera and keeps the image pointed in one direction while you lower it from the bait boat and search the bottom.

Available for the Carplounge Winchcam and for the 63 mm long Stealthcam UK Winchcam underwater camera.

How it works:

Four fins stop the camera from turning on its cable. When the camera hangs at an angle, the top arm works like a wind vane and keeps the lens pointed into the current.

The cable itself is the pivot. Loop the cable from the back of the camera into one of the cable clips on the arm, and the camera settles at that angle:
Front clip: the camera looks straight ahead (90 degrees)
Rear clip: the camera looks down at 45 degrees
No clip: the camera hangs straight down
Next to each clip are two slots for a small cable tie, so the cable cannot slide through the clip.

Features:

Clicks onto the camera without tools, glue or screws
Stealthcam UK Winchcam 63 mm: four spring fingers click behind the step on the camera body, with an opening for the temperature sensor marked SENSOR
Carplounge Winchcam: spring fingers click behind the front rim of the camera, and the four sensor holes in the camera body stay free
Cable clips sized for the cable of each camera
Easy to take off: bend the fingers outward a little and slide the camera out
Rounded fins, nothing sharp to snag your line or net


Choose your camera when ordering:

Stealthcam UK Winchcam 63 mm: for the 63 mm long version of the camera, body 34 mm, 4 mm cable
Carplounge Winchcam: stainless camera with 34 mm front rim, 1.8 mm cable

Not sure which Stealthcam version you have? Measure the camera from the lens to the back (without the cable). This anti-spinner fits the 63 mm version. Have a different length? Send me a message.


What you get:

1 anti-spinner for the camera of your choice

Size (approx.): 79 x 64 x 74 mm

Also have a Carplounge AIO controller? Have a look at the monitor holder in my shop. It is also available as a bundle with the matching anti-spinner.

Made to order and shipped from the Netherlands with PostNL track and trace.

Have a different underwater camera? Send me a message with its measurements. The design is parametric and can often be adapted.

This is an independently designed accessory. It is not made or endorsed by Carplounge or Stealthcam UK. Brand names are only used to describe compatibility.