3-Tool Vacuum Attachment Wall Holder, 3D Printed PETG Organizer (27-35mm)

Get your shop-vac hose off the floor in 2 minutes. Snap it in, pull it out one-handed.

Measure your adapter: if it's 27–35 mm (about 1-1/16″ to 1-3/8″) across, it fits. Not sure? Message us and we'll confirm.

Printed to order in tough PETG. Screws included. Mount into a stud or wood backing.

Designed to fit many vacuum attachments with approximately 27–35 mm openings. Measure before ordering.

Vacuum attachments shown in photos are for scale and are not included.

Keep your vacuum attachments off the floor and ready to grab. VacDock holds three vacuum tools on tapered cones. Press lightly and they rest securely, press a little more for a snug grip, and they lift right off.

- 3D printed in black PETG in my home studio in Fernandina Beach, Florida
- Tested in my own home with 100 rough on/off cycles while wall mounted
- Includes 2 black #8 x 1-1/2" screws, 2 matching drywall anchors and an installation card
- Size: 8-1/4" long x 2-3/4" tall x 2-1/4" deep (from the wall)
- Made to order, ships in 3-5 business days

WILL IT FIT MY ATTACHMENTS?
Each cone tapers from about 35 mm at the base to 26 mm at the tip. It is designed for attachments with a round opening of approximately 27-35 mm (about 1-1/16" to 1-3/8") inside. This range is approximate, not guaranteed, and not every vacuum brand will fit, so please measure the inside of your attachment's opening before ordering.

PLEASE NOTE
For lightweight vacuum attachments only. Do not hang the vacuum or heavy items on it.