Card Holder STL Set – 3 widths for place cards and postcards, minimalist photo stand, 3D print files
Item highlights
Seller's description
SMALL STAGE – MAP HOLDER
Three simple stands with soft shoulders and a slightly angled groove. For lightweight place cards, photos, and small postcards; not suitable for smartphones or tablets. Digital download for your own 3D printer, no physical item.
SCOPE OF DELIVERY AND DIMENSIONS
A ZIP file containing three STL files and a README. Widths: 60, 90, and 120 mm; each 32 mm deep and 15 mm high. Horizontal groove width: 2.4 mm, vertical depth: approximately 9.5 mm, angle: approximately 11 degrees to the vertical. Please allow for printing tolerances and actual paper thickness. Card height and center of gravity determine stability; test with your own card. No guarantee of universal fit or stability.
FILES AND PROCESSING
First, extract the ZIP file. The STL file does not contain a reliable unit of measurement: import it into your slicer as millimeters and compare it to the dimensions listed here. All sizes are separate files; no G-code or printer profile is included. The colors in the CAD images are examples of freely selectable filament colors, not multi-color files.
Place the flat side down on the print bed. The shapes are designed for upright FDM printing without separate support structures; this is not a guarantee of a previously tested print result. As a starting point, a layer height of 0.20 mm, 3-4 wall lines, and a profile suitable for the filament can be used. Check the print bed size, slicer preview, and material suitability beforehand. A test print is required. PLA may be suitable for dry indoor environments; observe heat resistance and material specifications.
EXAMINATION AND LIMITS
The supplied STL files were re-imported after export and checked for closed, consistently oriented meshes, positive volume, a connected body, and non-empty horizontal cross-sections. CAD images were rendered directly from these meshes. No physical proof print or testing with a specific printer was performed.
For lightweight items only, for use in dry indoor areas. Not suitable for food, beverage, candle, toy, load-bearing, or safety-related applications. Do not expose to heat. Weight and printing time specifications are not included as they depend on the material and slicer settings.
USE
Private use and the production of physical products for commercial sale are permitted. The digital files may not be shared, resold as files, or offered in file collections. Legally permitted uses and statutory warranty rights remain unaffected.
Maybels design with AI support. Independently constructed geometry, no imported external models or font files.
Provider: Katharina Hartwig / Maybels, Marthastr. 15, 45130 Essen, Germany; shop [!at] maybels.de.
If something goes wrong with an order, we've got your back for all eligible purchases. View program terms
Price:$3.35
You can only make an offer when buying a single item
Delivery
Instant download
Your files will be available to download once payment is confirmed. Here's how.
Instant download items don't accept returns, exchanges or cancellations. Please contact the seller about any problems with your order.
Seller's description
Specifications
SMALL STAGE – MAP HOLDER
Three simple stands with soft shoulders and a slightly angled groove. For lightweight place cards, photos, and small postcards; not suitable for smartphones or tablets. Digital download for your own 3D printer, no physical item.
SCOPE OF DELIVERY AND DIMENSIONS
A ZIP file containing three STL files and a README. Widths: 60, 90, and 120 mm; each 32 mm deep and 15 mm high. Horizontal groove width: 2.4 mm, vertical depth: approximately 9.5 mm, angle: approximately 11 degrees to the vertical. Please allow for printing tolerances and actual paper thickness. Card height and center of gravity determine stability; test with your own card. No guarantee of universal fit or stability.
FILES AND PROCESSING
First, extract the ZIP file. The STL file does not contain a reliable unit of measurement: import it into your slicer as millimeters and compare it to the dimensions listed here. All sizes are separate files; no G-code or printer profile is included. The colors in the CAD images are examples of freely selectable filament colors, not multi-color files.
Place the flat side down on the print bed. The shapes are designed for upright FDM printing without separate support structures; this is not a guarantee of a previously tested print result. As a starting point, a layer height of 0.20 mm, 3-4 wall lines, and a profile suitable for the filament can be used. Check the print bed size, slicer preview, and material suitability beforehand. A test print is required. PLA may be suitable for dry indoor environments; observe heat resistance and material specifications.
EXAMINATION AND LIMITS
The supplied STL files were re-imported after export and checked for closed, consistently oriented meshes, positive volume, a connected body, and non-empty horizontal cross-sections. CAD images were rendered directly from these meshes. No physical proof print or testing with a specific printer was performed.
For lightweight items only, for use in dry indoor areas. Not suitable for food, beverage, candle, toy, load-bearing, or safety-related applications. Do not expose to heat. Weight and printing time specifications are not included as they depend on the material and slicer settings.
USE
Private use and the production of physical products for commercial sale are permitted. The digital files may not be shared, resold as files, or offered in file collections. Legally permitted uses and statutory warranty rights remain unaffected.
Maybels design with AI support. Independently constructed geometry, no imported external models or font files.
Provider: Katharina Hartwig / Maybels, Marthastr. 15, 45130 Essen, Germany; shop [!at] maybels.de.
Manufacturer(s):
Katharina Hartwig / Maybels
Marthastr. 15
45130 Essen
Deutschland
shop [!at] maybels.de
Product safety:
Digital STL files for lightweight paper cards. No phone/tablet holder and no guarantee of stability. Check the groove, printing tolerance, and stability with your own card. Small parts are not toys; a test print is required. No physical testing is performed.
-
UseSupplies for making crafts
-
Item typeDigital download
-
Digital file type(s)1 ZIP
If something goes wrong with an order, we've got your back on all eligible purchases. View program terms
Meet your seller
More from this shop
-
Digital download
New Year's Eve Games PDF – Year in Review, Forecasts, 12 Conversation Cards, 8 Party Bingo Sheets and Time Capsule for Printing
$4.83
-
Digital download
Kabel Organizer STL Set – 2 offene Kabelablagen und 2 Kabelwickler, Schreibtisch Ordnung, 4 Dateien für 3D Druck
$3.84
-
Digital download
Weihnachtliche Tischdeko PDF und SVG – Tischkarten, Menükarten, Bestecktasche und Serviettenbanderolen, 3 Farbwelten
$5.81
-
Digital download
Adventskalender Häuser SVG und PDF – 24 Zahlen, 3 Papierhaus Größen, nummerierte A4 Bastelvorlagen für Weihnachten
$6.79
-
Digital download
Winterdorf SVG und PDF – 3 Papierhäuser, 2 Tannen und Schneebasis, Weihnachtsdeko zum Basteln, A4 Vorlagen
$5.81
-
Digital download
Gift Box SVG Set with Lid – 3 Sizes, 6 Cut Files with Separate Fold Paths, Paper Box Template A4
$3.84
Disclaimer: Etsy assumes no responsibility for the accuracy, labeling, or content of sellers' listings and products. Electrical or electronic products may pose a risk of fire or electrocution. Vintage, handmade, refurbished, or modified electrical or electronic products may not meet current safety standards and may not be in safe working order. Inspect carefully before use and message the seller if you have concerns relating to the product. Do not use a vintage electrical or electronic item if its safety cannot be verified. To reduce the risk of fire, never leave vintage electrical or electronic products plugged in unattended. See Etsy's Terms of Use for more information.