Report this item to Etsy

Garage Workbench Plans with Shelf and Back Panel | Custom Size 2x4 Wall Workbench, Cut List Calculator, Cutting Diagram, PDF

20+ views in the last 24 hours

Price:$12.90

Loading
Includes Etsy Purchase Protection

You can only make an offer when buying a single item

Highlights

  • Designed by BuildToSizePlans
  • Supplies for making crafts
  • Digital download
  • Digital file type(s): 2 PDF, 1 TXT, 1 ZIP

A stationary garage or workshop workbench that stands along a wall: a plywood worktop on a 2x4 frame, a full-length plywood shelf on a second 2x4 frame at the height you choose, and an optional plywood back panel above the worktop, carried on the back legs and fixed to the wall. Unlike a rolling bench it stands on its legs, and it runs up to 2440 mm (8 ft) long (for a longer wall, build two benches side by side); benches longer than the middle-leg setting get a middle pair of legs. The legs are screwed to the outside faces of both frames, so the shelf is one plain rectangle with no notches. You type the bench length, the overall depth from the wall, the worktop height, the shelf height, a front overhang for clamping and the back panel height; every part follows. Screws and glue only, no special joinery. Tools: a circular saw or table saw, drill/driver, square, level and clamps.

This is a digital download. No physical item is shipped.

The step-by-step build pictures and the short build video are technical renders drawn by software from this plan's own part sizes at the default size; they are not photographs and not AI images.

WHAT YOU GET (4 files)
- cut-list-kit.zip: the spreadsheet cutlist-calculator.xlsx plus copies of the two PDFs and the parts list as parts.csv (Etsy does not accept spreadsheet uploads directly, so it comes zipped; unzip it on a computer). In the spreadsheet you type your sizes, your board and sheet sizes and your local prices; it recalculates every part, a cutting plan that allows for saw kerf (which part comes from which board and sheet), how many boards and sheets to buy, the hardware counts and the timber cost.
- plan.pdf: dimensioned drawings, a layout with the position of every part, a joint detail with screw lengths, the cut list for the default size, 11 build steps and the hardware list.
- cutting-diagram.pdf: the cutting plan drawn for the default size: 10 x 2x4 boards, 2440 mm (96 in) long, 89 mm (3 1/2 in) x 38 mm (1 1/2 in); 2 x plywood sheets, 2440 x 1220 mm (96 x 48 in), 18 mm (11/16 in; 3/4 in nominal) thick.
- parts.txt: the cut list for the default size as plain text for your phone at the timber yard.

DEFAULT SIZE (the drawings and the cutting diagram)
bench length 2000 mm (78 3/4 in); overall depth 700 mm (27 9/16 in); worktop height 900 mm (35 7/16 in); shelf height 250 mm (9 13/16 in); front overhang 50 mm (1 15/16 in); back panel above the worktop: yes; back panel height above the worktop 600 mm (23 5/8 in). The sheet ships in mm; switched to inches it starts from its own round inch defaults (bench length 78 in; overall depth 27 1/2 in; worktop height 36 in; shelf height 10 in; front overhang 2 in; back panel height above the worktop 24 in) and recalculates from there.

FINISHED SIZE AT THE DEFAULT
usable worktop depth 644 mm (25 3/8 in); overall height 1500 mm (59 1/16 in).

SIZES YOU CAN TYPE
bench length, end to end along the wall (up to 2440 mm / 8 ft; longer wall: two benches side by side) = 900 to 2440 mm (36 to 96 in); overall depth: wall (or the skirting or curb the back legs touch) to the front edge of the worktop = 500 to 900 mm (20 to 35 1/2 in); worktop height, floor to the worktop surface = 750 to 1050 mm (29 1/2 to 41 1/4 in); shelf height, floor to the top of the shelf = 150 to 400 mm (6 to 15 1/2 in); front overhang: worktop past the front legs (room for clamps) = 0 to 150 mm (0 to 6 in); back panel above the worktop (1 = yes, 0 = no) = yes or no; back panel height above the worktop = 200 to 900 mm (8 to 35 1/2 in). Metric or imperial. Enter your real board and sheet sizes and the plan adapts. Parts too long for your stock are flagged by name, never hidden.

OPENING THE SPREADSHEET
No macros. Tested in LibreOffice.

GOOD TO KNOW
- The cutting plan is a good plan, not a guaranteed minimum.
- Hardware (rail screws, leg screws, panel screws and more) is counted, not priced.
- Not computed by the spreadsheet:
- Wood grain direction, knots, warp or other defects in your stock.
- Trimming factory ends or edges beyond the saw kerf you enter.
- Board-feet: boards and sheets are counted as whole pieces.
- Your wall: the type and length of the wall fixings depend on your wall (studs or masonry) and are not computed; the back-leg fixings are counted, but the extra stud fixings and their packers (one each for every stud the back-leg fixings miss, build step 8) depend on where your studs are and are not counted.
- Spacer blocks for assembly, stud packers and skirting packers: cut them from offcuts or scrap; they are not in the cut list.
- Floor flatness: the worktop height assumes a level floor; pack hard shims under any leg that needs it.
- Pegboard, hooks, tool rails, lights or outlets on the back panel.
- This is a plan for a stationary workbench. It makes no load, weight, strength or stability rating of any kind, and no promise that it fits your wall, your floor or your space. Nobody should stand, sit, kneel or climb on the worktop, the shelf, the frames or the back panel. Fix the bench to the wall as build step 8 says (through the back legs, and through the top frame into every stud the back legs miss), and always before anything is hung on the back panel: a loaded back panel pulls the bench forward, and a tall bench can tip. Fix into wall studs or solid masonry; hollow-wall anchors alone are not enough to hold it. Check every part against the cut list before assembly.

Created with the help of AI tools: the design, spreadsheet, drawings and text were developed with AI assistance. The spreadsheet was checked with automated tests in LibreOffice.

Because this is a digital download, returns are not accepted. If a file will not open or something looks wrong, send me a message and I will help.

Instant Download

Your files will be available to download once payment is confirmed.  Here's how.

Instant download items don’t accept returns, exchanges or cancellations. Please contact the seller about any problems with your order.

Etsy Purchase Protection
Shop confidently on Etsy knowing if something goes wrong with an order, we've got your back for all eligible purchases — see program terms

You may also like

Disclaimer: Etsy assumes no responsibility for the accuracy, labeling, or content of sellers' listings and products. Electrical or electronic products may pose a risk of fire or electrocution. Vintage, handmade, refurbished, or modified electrical or electronic products may not meet current safety standards and may not be in safe working order. Inspect carefully before use and message the seller if you have concerns relating to the product. Do not use a vintage electrical or electronic item if its safety cannot be verified. To reduce the risk of fire, never leave vintage electrical or electronic products plugged in unattended. See Etsy's Terms of Use for more information.

Shoppers with similar taste loved these

Show more
Show more
Listed on Oct 28, 2026