Chicken Run Plans Made to Your Size, Mesh Pen with Door, Pop-Hole and Apron, Cut List Calculator, Metric and Imperial
20+ views in the last 24 hours
Price:$12.90
Here's what's eligible:
- Your order doesn't match the item description or photos
- Your item arrived damaged
- Your item arrived after the estimated arrival window
- Your item didn't arrive or was lost in the mail
You can only make an offer when buying a single item
Highlights
A chicken run made to your size: a rectangle of 2x4 wall panels covered in welded mesh, with an optional pop-hole in one end wall to meet a coop and a hinged mesh door in the other. Each long side is built from panels joined end to end, so every joint stands as a doubled mid post and every plate comes out of one board; a top frame of 2x4 ties and caps lies on the walls and takes a mesh top, a solid roofing sheet or nothing. A mesh apron can be pegged flat on the ground all round. Every piece is a plain rectangle cut square: no angles, no notches, no joinery beyond screws. The mesh and any roofing sheet are counted as plain areas with their staples, pegs and screws, not specified. The run is held to 1200 mm (47 in) high: it is a reach-in pen, not a walk-in run. How many birds it suits is not computed, and nothing in it is rated for predators, wind or load; what it does not do is listed in full under GOOD TO KNOW. It is a companion to our Chicken Coop and Chicken Tractor kits. Its pop-hole sits on the run's bottom plate, so to meet a coop door raised on legs you type a pop-hole tall enough for the coop's ramp to come down through it, and you close the gap between the two yourself. Tools: a circular or hand saw, drill/driver with pilot-drill bits, staple gun, wire cutters or mesh snips, work gloves, a mallet or hammer for the pegs and anchors, square, tape, level and clamps.
This is a digital download. No physical item is shipped.
The step-by-step build pictures and the short build video are technical renders drawn by software from this plan's own part sizes at the default size; they are not photographs and not AI images.
WHAT YOU GET (4 files)
- cut-list-kit.zip: the spreadsheet cutlist-calculator.xlsx plus copies of the two PDFs and the parts list as parts.csv (Etsy does not accept spreadsheet uploads directly, so it comes zipped; unzip it on a computer). In the spreadsheet you type your sizes, your board sizes and your local prices; it recalculates every part, a cutting plan that allows for saw kerf (which part comes from which board), how many boards to buy, the hardware counts and the timber cost.
- plan.pdf: dimensioned drawings, a layout with the position of every part, a joint detail with screw lengths, the cut list for the default size, 12 build steps and the hardware list.
- cutting-diagram.pdf: the cutting plan drawn for the default size: 17 x 2x4 boards, 2440 mm (96 in) long, 89 mm (3 1/2 in) x 38 mm (1 1/2 in); 2 x 2x2 boards, 2440 mm (96 in) long, 38 mm (1 1/2 in) x 38 mm (1 1/2 in).
- parts.txt: the cut list for the default size as plain text for your phone at the timber yard.
DEFAULT SIZE (the drawings and the cutting diagram)
run length 2400 mm (94 1/2 in); run width 1200 mm (47 1/4 in); run height 1000 mm (39 3/8 in); door opening width 600 mm (23 5/8 in); mid posts per long side: 1; top cover: 1; pop-hole in the near end wall to meet a coop: yes; pop-hole width 300 mm (11 13/16 in); pop-hole height 400 mm (15 3/4 in); roofing sheet overhang past the frame 100 mm (3 15/16 in); anti-dig apron width 300 mm (11 13/16 in). The sheet ships in mm; switched to inches it starts from its own round inch defaults (run length 96 in; run width 48 in; run height 40 in; door opening width 24 in; pop-hole width 12 in; pop-hole height 16 in; roofing sheet overhang past the frame 4 in; anti-dig apron width 12 in) and recalculates from there.
FINISHED SIZE AT THE DEFAULT
overall length 2400 mm (94 1/2 in); overall width 1200 mm (47 1/4 in); overall height to the top of the frame 1000 mm (39 3/8 in).
SIZES YOU CAN TYPE
run length, outside: the near end (pop-hole end) to the far end (door end) = 1200 to 4800 mm (48 to 189 in); run width, outside: side wall to side wall = 900 to 2400 mm (36 to 94 1/2 in); run height: the ground to the top of the top frame (held at 1200 mm) = 600 to 1200 mm (24 to 47 in); door opening width (far end; a hinged mesh door the full height between the plates) = 300 to 900 mm (12 to 35 in); mid posts per long side (panel divisions; 0 for none) = 0 to 5; top cover (0 = open, 1 = mesh top, 2 = solid roofing sheet) = 0 to 2; pop-hole in the near end wall to meet a coop (1 = yes, 0 = none) = yes or no; pop-hole width, between the jambs (pop-hole only) = 150 to 500 mm (6 to 19 1/2 in); pop-hole height, up from the top of the bottom plate (pop-hole only) = 150 to 900 mm (6 to 35 in); roofing sheet overhang past the frame, all round (solid roof only) = 0 to 300 mm (0 to 11 3/4 in); anti-dig apron width: mesh laid flat on the ground outward from the walls, all round (0 for none) = 0 to 600 mm (0 to 23 1/2 in). Metric or imperial. Enter your real board sizes and the plan adapts. Parts too long for your stock are flagged by name, never hidden.
OPENING THE SPREADSHEET
No macros. Tested in LibreOffice.
GOOD TO KNOW
- The cutting plan is a good plan, not a guaranteed minimum.
- Hardware (plate screws, header screws, join screws and more) is counted, not priced.
- Not computed by the spreadsheet:
- How many birds the run suits, or any other welfare figure: ground area per bird, height, perches, shade, dust bath, feed or water. The Cut List prints the ground area inside the walls and compares it to nothing.
- Any predator, security, escape or containment rating. The mesh is a plain area with no gauge, aperture, wire thickness, coating or material; the apron, the staples, the door, the hinges and the latch are counted, not rated.
- WARNING: anchoring. Nothing in this plan holds the run down against wind or stops an animal digging under it beyond the counted apron and ground anchors, neither of which is sized or rated.
- Any load, strength, stiffness, stability or racking rating for the walls, the top frame or the roof. No diagonal brace is specified; the top frame and the mesh are what square the run.
- Rain, snow, wind or sun on a solid roof: the sheet lies level on the top frame with no fall, and nothing says which sheet spans your tie spacing or how far it may overhang.
- Weather, rot or insects, and how long any part lasts outdoors: the bottom plates sit on the ground. Timber treatment and any finish are yours to choose.
- Ground levelling, foundations or a base under the bottom plates.
- Fixing the run to a coop. The pop-hole is an opening on the run's bottom plate in the near end wall; whether it meets your coop's pop door depends on the height you type and on your coop. Lining the two up, any ramp, and closing any gap between the two are yours to do.
- Where exactly to fit the hinges and the latch, and any stop, catch, bolt or padlock. The plan gives only where their screws must not go: the hinge screws between two join heights, inside the hinge band.
- Which timber, mesh, sheet, staples, pegs or anchors to buy: species, grade, treatment, ground-contact rating, coating or the safety of any finish. Check the maker's figures.
- Mesh roll widths, laps, joins between mesh pieces and offcuts: the areas are plain areas with no allowance for laps.
- Grain direction, knots, warp or other defects in your stock.
- This is a plan for a chicken run: a reach-in pen, NOT a building for a person to enter. It is held to 1200 mm (47 in) to the top of its frame for that reason; no person may get into it, or stand, sit, climb or lean on any part of it, and the door is for reaching in. The height limit keeps adults out, not small children: the door opening (up to 900 mm, 35 in, wide) and a low run with an open top are big enough for a child to get into, so keep children out of the run and off it, keep the door latched from outside, and do not leave a low open-top run where a child can step in. It makes NO rating of any kind: no load, strength, stability, wind, snow or rain rating for the walls, the top frame or the roof; no predator, security, escape, fastening or mesh-strength rating for the mesh, the apron, the door or the latch; and no stocking or welfare rating - how many birds the run suits is not computed, and nothing here says how much ground, height or cover a bird needs. The mesh and any roofing sheet are plain areas, and the hinges, latch, staples, pegs and anchors are counted, never specified or sized. Nothing in this plan holds the run down: anchor it against wind and against animals digging under it (the apron and the ground anchors are counted, not rated), stand it on firm, level ground, and check every part against the cut list before you assemble anything.
Created with the help of AI tools: the design, spreadsheet, drawings and text were developed with AI assistance. The spreadsheet was checked with automated tests in LibreOffice.
Because this is a digital download, returns are not accepted. If a file will not open or something looks wrong, send me a message and I will help.
Instant Download
Your files will be available to download once payment is confirmed. Here's how.
Instant download items don’t accept returns, exchanges or cancellations. Please contact the seller about any problems with your order.
Etsy Purchase Protection
Shop confidently on Etsy knowing if something goes wrong with an order, we've got your back for all eligible purchases —
see program terms
More from this shop
Visit shop-
Digital download
Dog House Plans Made to Your Dog's Size, Plywood Kennel with Cut List
$14.00
-
Digital download
Nativity Stable Plans Sized to Your Figures | Wooden Creche for 4 to 24 in Figures, 12 in Default, No Angled Cuts, Cut List Calculator PDF
$9.90
-
Digital download
Rabbit Hutch Plans, Your Own Size | DIY Bunny Hutch and Run PDF, Sleeping Bay + Mesh Front, No Angled Cuts, Cut List Calculator
$12.90
-
Digital download
Tall Garage Storage Cabinet Plans Made to Your Size, with Doors and Cut List
$11.90
Be the first to leave a review
-
Digital download
6x10 Chicken Run DIY Plans: Walk-in Coop Building Guide (PDF Download)
Sale Price $7.00
Original Price $10.00
-
Digital download
6x10 Chicken Run Building Plans – DIY Walk-in Coop (PDF Download)
Sale Price $7.70
Original Price $11.00
-
Digital download
6x12 Chicken run plans - DIY Walk-in Chicken Run Plans - Chicken coop plans with run
Sale Price $7.50
Original Price $10.00
-
Digital download
4x12 Chicken Run Plans | Walk-In Backyard Poultry Enclosure DIY (PDF Download)
Sale Price $7.70
Original Price $11.00
-
Digital download
6x18 Chicken run plans - DIY Walk-in Chicken Run Plans - Chicken coop plans with run
Sale Price $7.50
Original Price $10.00
-
Digital download
8x18 Chicken run plans - DIY Walk-in Chicken Run Plans - Chicken coop plans with run
Sale Price $7.50
Original Price $10.00
-
Digital download
8x12 Walk-In Chicken Run Building Plans – DIY Coop Run (PDF Download)
Sale Price $7.70
Original Price $11.00
-
Digital download
8x16 Chicken Run Building Plans – DIY Walk-In Poultry Run - (PDF Download)
Sale Price $10.49
Original Price $14.98
-
Digital download
8x10 Chicken Run Building Plans – DIY Walk-in Coop (Download PDF)
Sale Price $7.70
Original Price $11.00
-
Digital download
5x12 Walk-in Chicken Run DIY Plans – Large Chicken Coop (PDF Download)
Sale Price $7.70
Original Price $11.00
-
Digital download
Large Chicken Run Plans: 8x24 for 25 Chickens (PDF Download)
Sale Price $9.51
Original Price $12.68
-
Digital download
8x12 Walk-in Chicken Run DIY Plans – Downloadable PDF
Sale Price $7.70
Original Price $11.00
Disclaimer: Etsy assumes no responsibility for the accuracy, labeling, or content of sellers' listings and products. Electrical or electronic products may pose a risk of fire or electrocution. Vintage, handmade, refurbished, or modified electrical or electronic products may not meet current safety standards and may not be in safe working order. Inspect carefully before use and message the seller if you have concerns relating to the product. Do not use a vintage electrical or electronic item if its safety cannot be verified. To reduce the risk of fire, never leave vintage electrical or electronic products plugged in unattended. See Etsy's Terms of Use for more information.
Shoppers with similar taste loved these
-
Digital download
Farmhouse Barn Centerpiece Table Box Digital File - Farm Sweet Farm Chicken wire Sign SVG Glowforge Laser Ready SVG
$8.00
-
Digital download
Birdhouse Laser Cut File: 3D Miniature Model (Digital Download)
Sale Price $1.50
Original Price $2.50
-
Digital download
The Coop Laser SVG Set| Chicken SVG| Laser Cut Chicken| Glow forge| Chicken SVG| Chicken Tiered Tray|
Sale Price $3.37
Original Price $4.49
-
Digital download
Woodland Animals SVG Bundle | Mushroom, Forest, Boho, Summer, Fall Decor | Laser SVG Files | Shelf Sitters | Digital Download | Glowforge
Sale Price $7.12
Original Price $9.50
-
Digital download
Chicken Tiered Tray Svg | Chicken Coop Tiered Tray Svg | Chicken Tier Tray Svg | Chicken Signs svg | Chicken Svg | Farmhouse Tiered Tray Svg
Sale Price $3.60
Original Price $6.00
-
Digital download
Chicken Laser Cut Files, Chicken Interchangeable Leaning Signs, Farmhouse Laser Designs, Chicken Farm Squares Laser SVG, Farm Sweet Farm SVG
Sale Price $3.47
Original Price $6.95
-
Digital download
Kitchen tiered tray set Mothers Day Mom Gift svg cut file for laser, Glowforge. Cut tested. farmhouse kitchen / dining room decor
$7.99
-
Digital download
Laser file birdhouse owl, moose & cat – CNC laser cutting SVG, CDR and more – Unique DIY decoration for garden and home
Sale Price $4.44
Original Price $6.34
-
Digital download
Barnyard Buddies Magnets SVG| Cow SVG| Laser Cut Pig| Glow forge| Magnet SVG| Chicken Magnet
Sale Price $2.99
Original Price $3.99
-
Digital download
Bird Feeder Bird House 3.8mm Laser Cut SVG Digital File
$3.50
-
Digital download
Welcome to Our Coop Porch Sign SVG | Interchangeable Porch Leaner | Farmhouse Chicken SVG | Vertical Welcome Sign | Laser Cut File
Sale Price $4.15
Original Price $6.92
-
Digital download
Farm Barn Box Basket with Optional Egg Tray (Read Description Closely-No Refunds) Laser DIGITAL FILE ONLY svg
$5.00