Handmade 18 in Rustic Solid Wood Floating Corner Shelf, Natural Polyurethane Finish Home Decor Set of 2

HANDMADE IN USA

Make use of otherwise wasted wall space with this set of 2 handmade 18-inch floating corner shelf. Designed to fit neatly into a corner, these wood shelves provide an attractive way to display plants, photos, collectibles, kitchen accessories, bathroom essentials, and other favorite décor while keeping your floor space clear.

The 18-inch size gives you plenty of room for larger displays while the corner design makes these shelves especially useful in kitchens, bathrooms, living rooms, bedrooms, offices, and entryways. Whether your style is rustic, farmhouse, traditional, or modern, these floating corner shelves add practical storage and a warm, handcrafted touch to your home.

With the natural wood you will see all the knots, pits, and imperfections of the wood with a smooth to the touch poly finish.

All Stains and Water Based Polyurethane used to finish the shelves are Low VOC.

All Hanging Hardware is included with your order.

This Stain is available in all my Choose a Stain Listings.

There may be Knots and Pitting of the front, top, and bottom of shelves.

Check my shop or Shipping and Policies for Coupon Codes to receive any available discounts.

Cord access can be cut in the back of the shelf.

Tools need for Installation

Screwdriver or Drill Gun

INSTALLATION WITH WALL ANCHORS

15 lbs Weight Limit

1.The shelf may be used as an straight edge on both sides of the corner.


2.Holding the shelf with the routed slot side up place the shelf in the corner where you would like the shelf to be placed after installation.


3.With an non permanent marking tool. Draw a straight line the length of the slot.


4.Flip the shelf over to the other side of the corner and repeat step #3


5.Looking at the Corner on the right side place the wall anchor starting point about ½ inch from the from the farthest end of the line. Place the the point of the wall anchor on the line at that point and screw the wall anchor into the Drywall til the head of the wall anchor is flush with the Drywall.


6.Looking at the Corner on the right side about 1” from the corner. Place the the point of the wall anchor on the line at that point and screw the wall anchor into the Drywall til the head of the wall anchor is flush with the Drywall.


7.Looking at the Corner on the left side place the wall anchor starting point about ½ inch from the from the farthest end of the line. Place the the point of the wall anchor on the line at that point and screw the wall anchor into the Drywall til the head of the wall anchor is flush with the Drywall.


8.Looking at the Corner on the left side about 1” from the corner. Place the the point of the wall anchor on the line at that point and screw the wall anchor into the Drywall til the head of the wall anchor is flush with the Drywall.


9.Insert 1 screw into each Drywall anchor with the head of the screw about ⅜” from the wall.


10.After the 4 screws are inserted into the Drywall anchors. Slide the shelf onto the drywall anchors being careful not to damage the wall or corner.

11.The screws can be adjusted in or out if the corner is not a full 90 degrees.

Note:
Free shipping excludes Hawaii and Alaska. We will send you a separate invoice for the shipping payment.