Crafter Depot HTV Foil - 12"x25' Roll, Foil Heat Transfer Vinyl, Foil HTV Vinyl, Metallic HTV, Foil for Shirts, Metallic Foil, Pattern Foil

Our foils will make your designs stand out with a metallic shine. This metallic foil is designed for heat transfer, using Siser EasyWeed Adhesive (sold separately here https://etsy.me/2K2ZLQP). But you can also use this beautiful foil for other projects, such as wood signs or home décor. This foil will adhere to any solid sticky surface (hot glue or liquid glue is not recommended) and will add that extra pop of glam that we all love. We have a HUGE selection of foils to choose from including several colors, patterns, and holographic finishes. To the victor, go the foils!

--------------------
LISTING INCLUDES:
- 1 roll of Crafter Depot foil in chosen color/pattern, 12” x 25’

-------------------
APPLIES TO:
- 100% Cotton
- 100% Polyester
- Poly/Cotton blends
- Leather

--------------------
APPLICATION:
HOME IRON APPLICATION:
- Cut adhesive in reverse
- Weed excess material
- Set iron dial between cotton and linen
- Cover design with Kraft paper or cover sheet
- Place on a flat, hard surface (ironing board is NOT recommended)
- Press iron with medium/firm pressures (DO NOT slide iron)
- Press the design for 5-10 seconds, enough to activate the adhesive
- Peel carrier hot
- Cut foil to desired size and place on top of the adhesive, color/pattern side up
- Lay the cover sheet on top and press the design for 10-15 seconds
- If areas of the design lift after application, apply cover sheet and repress for 5-10 seconds

HEAT PRESS APPLICATION:
- Cut adhesive in reverse
- Weed excess material
- Preheat garment for 2-3 seconds (this removes all moisture in the garment)
- Apply adhesive at 305°F
- Press for 5-10 seconds, enough to activate the adhesive
- Peel carrier hot
- Cut foil to desired size and place on top of the adhesive, color/pattern side up
- Lay the cover sheet on top and press the design for 10-15 seconds
- If areas of the design lift after application, apply cover sheet and repress for 5-10 seconds
- Peel carrier hot or cold

--------------------
CARE INSTRUCTIONS:
- Wait 24 hours before first wash
- Machine wash COLD using a mild detergent
- Dry inside out on low heat or air dry
- NO chlorine bleach
- DO NOT DRY CLEAN

--------------------
OTHER HTV VINYL AVAILABLE:
12" x 25' Crafter Depot Specialty HTV Foil - https://etsy.me/2JayXwR
12" x 20" Siser Glitter 12 Sheet Bundle - http://etsy.me/2A0UeFn
12" x 18" Siser Pattern HTV Sheets - http://etsy.me/2BHMzfe
12" x 15" Siser EasyWeed 6 Sheet Bundle - http://etsy.me/2BJxf1L
12" x 15" Siser EasyWeed 12 Sheet Bundle - http://etsy.me/2iAhFhm

--------------------
SUGGESTED PRODUCTS:
Siser HTV Adhesive - https://etsy.me/2K2ZLQP
Siser Color Guide Catalog - http://etsy.me/2zXHS0u
Silhouette Tool Kit - http://etsy.me/2AvV2Gq