Do you lay your bar of soap on a shelf in the shower when you are done using it? If so, it probably sits in a pool of water, continually dissolving and wasting away. Not only is this a waste of soap but it also leaves behind soap scum residue. Ewwww With this soap dish the water drains away and thus doesn't leave that residue behind.

Strong suction cup is rated to hold 7lbs and the fulcrum design of the holder adds even more strength. For best results, use rubbing alcohol to clean the suction cup and the mating surface (mirror, shower tile, window, etc) of any dirt, grime, or soap residue before use. Always test the grip of the suction cup before using.

Measurements without suction cup are roughly- 120mm wide x 107mm deep x 42.5mm high (4.72" wide x 4.21" deep x 1.67" high)

Need somewhere in the shower to hold your razors? How about somewhere close to the vanity to hold your makeup brushes, sponges, or other applicators? Could be used for toothpaste, lotion, facial wash, fingernail polish, etc. Pairs great with me bar soap holder which can be purchased in another listing(link found below)


There are 20 colors to choose from currently and if you don't see the color you want feel free to message me and I will see if I can get that color. These are printed out of pla which is a corn based biodegradable non-toxic material or petg depending on color choice.

**Translucent colors will not appear translucent on thicker models**
**Pay extra attention to the color samples picture, such as Galaxy Blue is more of a purple color**

3D printing is accomplished by printing layer by layer, slooooowly. Due to this additive layering, there may be minor imperfections that can easily be fixed if you decide to finish it into a show piece. Posted pictures in listings are always representative of final quality.


8 Tips on Using Suction Cups

The care and use of suction cups is very simple.

1. Make sure the suction cup is clean and free from debris.
2. If the suction cup needs to be cleaned, wash in warm soapy water then dry gently with a lint-free cloth.
3. Clean the surface you are applying the suction cup to. It won’t adhere well to a dirty surface.
4. To enhance suction, a tiny dab of Vaseline or cooking oil may be rubbed on the rim of the cup.
5. Press the cup all the way down, against the surface.
6. The suction cup may need to be “burped” periodically by pressing down on it to remove any air that may have seeped in.
7. Temperature and humidity variations may make a suction cup lose its grip. If bonded above 40⁰ F/5⁰ C the cup will provide the most reliable service from -22⁰ to 120⁰ F.
8. To remove the cup, simply pull up on the release tab to break the suction.


Newly added similar designed holder for razors, makeup brushes, sponges, etc has been added and can be found here:

https://www.etsy.com/listing/808771156/suction-cup-sponge-holder-shower-caddy?ref=shop_home_active_1