Continuous Motion High Torque Quartz Clock Movement (Silent Sweep) Choice of Hands and Shaft Length

These are high torque, silent sweep continuous motors that do not tick.
You can choose from 3 different shaft sizes. You have a selection of 1 set of hands that include a sweep hand. The sweep hand(second hand) has a smooth flowing motion.

*3 year factory warranty*
*Highly accurate time keeping*
*Requires 1 "AA" battery (not included)*
*Includes all of the needed mounting hardware: 1 rubber washer, 1 brass washer and 1 brass hex nut.
If you are not wanting a sweep hand(second hand), please let me know so we can give you either a brass or a black closed end nut to give your purchased motor a finished look. The end nut will not be included unless requested.

We measure the hands from the center of the mounting hole to the tip of the hand.

*OPTIONS AND SIZES*
*HANDS*

1- 1-3/8" fancy, black or brass
2 - 1-3/8" fancy sword, brass only
3 - 1-1/2" spade, black or brass
4 - 1-3/4" fancy sword, black or brass
5 - 2" diamond, black or brass
6 - 2" spade, black or brass
7 - 2-1/16" Maltese, black or brass
8 - 2-1/4" sword, black or brass
9 - 2-1/2" spade, black or brass
10-2-1/2" fancy sword, black or brass
11- 2-1/2" serpentine, black or brass
12- 2-3/4" diamond, black or brass (brass while supply last)
13- 2-3/4" fancy sword, black or brass
14- 2-7/8" fancy serpentine, brass only
15- 2-7/8" spade, black or brass
16- 3" Maltese, black or brass (DISCONTINUED)
17- 3- sword, black or brass
18- 3-1/16" fancy serpentine, black or brass
19- 3-1/4 diamond, black or brass
20- 3-1/4" fancy, black or brass
21- 3-3/8" fancy sword, black or brass
22- 3-1/2" spade, black or brass
23- 3-5/8" sword, black or brass
24- 3-7/8" fancy sword, black only
25- 4" spade, black or brass
26- 4-1/8" serpentine, black or brass
27- 4-1/8" sword, black or brass
28- 4-1/4", straight black or brass
29- 4-1/2" spade, black or brass
30- 4-3/4" serpentine, black only
31 - 5-1/4" spade, black or brass
33- 6-1/4" straight, black or brass (may clipped to size)
Motor size: 2-1/8" square x 5/8" case thickness.

*MOTORS*
¼" Threaded shaft length, the total shaft length is 5/8" with the hand stem.
7/16" Threaded shaft length, the total shaft length is 13/16" with the hand stem.
9/16" Threaded shaft length, the total shaft length is 15/16" with the hand stem.


*BLACK SWEEP HANDS(SECOND HANDS)* (IF REQUESTED)
1-3/8", 1-1/2", 2-3/8", 2-1/2", 2-3/4", 3" & 3-1/2"

*RED SWEEP HANDS(SECOND HANDS)* (IF REQUESTED)
1-3/4", 2-1/2", 2-3/4", 3" & 3-½"

YOU MAY MESSAGE us OR LEAVE A NOTE IN YOUR ORDER IF YOU WOULD LIKE A SWEEP HAND (SECOND HAND) OR NOT.

NOTE ON MEASURING:
Shaft length is the threaded portion that must pass thru your clock face, leaving a couple of threads to mount retaining nut.
(ex., if working with 1/4" tile as your clock face....then order the 7/16" threaded shaft)

MEASURING DIAL FOR HAND SIZE: measure from top of #12 to bottom of #6, divide in half. This will give your approx. minute hand length.

For direct wall mounting, you may need a metal clock hanger. We do include the hanger (depending on your selection) in the drop dome window with the motors.

If you would like to conceal your motor, we do sell mounting hubs that have a built-in hanger on another listing. THE MOUNTING HUBS ARE NOT INCLUDED IN THIS LISTING.
If you are interested or needing a wall mounting hub, here is the link to it:
https://www.etsy.com/listing/189639452/wall-mounting-hub-new-style


I do have other listings that have greater volume for a great price.

Link for 5 Continuous Motors:
https://www.etsy.com/listing/60387294/5-continuous-motion-high-torque-clock

Link for 10 Continuous Motors:
https://www.etsy.com/listing/154343094/10-continuous-motion-high-torque-quartz

Feel free to check out the rest of the shop with this link:
https://www.etsy.com/shop/clockparts?ref=simple-shop-header-name&listing_id=189738199

Also, this YouTube link may be helpful:
https://www.youtube.com/watch?v=yV5dd5g_Lis