Very realistic Raspberry 3D silicone mold

Raspberry Silicone Mold offered in three sizes:
Mini raspberries diameter ~ 0.5"
Medium raspberries - 0.7"
Large raspberries - 0.8"


PLEASE READ BEFORE PLACING YOUR ORDER:

We use Food grade silicone that is odorless and designed for all uses, including food purposes.
Color: Pink/Neon pink color. The tint can range from light to bright neon pink.
Useful Temperature Range -65F to 400F. (-53C to 205C).
Hardness - A0 or C15 Shore. (very soft and durable silicone).

The mold is designed to work with liquid materials that are not brittle when hardened. Also consider the viscosity of your material. Too viscous material may not flow into the far corners of the mold.

All the molds have been tested with M&P soap and epoxy resin . When using other materials such as wax, chocolate, & Jelly, concrete, cement, etc., they can be very tricky. Consider your material & skills in the materials you are working with.

If you are working with resin, use a spray release.

If you are working with wax, consider the fragility of your wax. Delicate and thin flower petals can break when released from the mold.

If you are working with materials not listed above, please consider your knowledge and experience with your material.

All molds are custom made to order. Time for manufacturing takes 1-5 working days.

Silicone undergoes vacuum treatment to remove air bubbles, as well as to increase service life of molds.

All 3d forms have 1-3 cuts on the sides of Molds. It is necessary for extraction of the finished product without cracking or breaking. All 3d molds have a positive keyed alignment feature on the cuts (the cuts are made in the form of a semicircular groove).

The new silicone sticks together and the slits become invisible. You just need to stretch the mold from the middle in different directions and the mold will open. Do not make cuts yourself, you can ruin your mold. If you have any questions, feel free to text me. We are always ready to help and respond with a few hours.

PLEASE NOTE: the vertical cut is not allowed to be straight, since the cut with the knife is made by pressing on the silicone, and not by cutting, sawing when using a conventional straight knife.

Cleaning Your Silicone Mold:
Wash your silicone mold with warm/hot water and mild liquid dish soap.
Pat dry thoroughly and then let the mold air-dry fully.
Never use any type of abrasive soap, cleaner or pad to clean your silicone mold!

Directions for soap making:
1. Spray (mist) inside surface of the silicone mold with alcohol (70-99 %)
2. Fasten the mold with elastic bands (if there are slits on the mold)
3. Pour soap base into the mold.
4. Shake the mold and gently tap on outside walls the mold to release air bubbles.
5. Place the mold with soap in the room with the cool temperature until the soap completely cooled off and hardened.
6. Gentle separated the edges of the mold from the soap and apply pressure on the bottom of the mold to release the soap from the mold.
7. Place your soap in a dry environment for 12-24 hours and when pack.