Description

Watercolor cacti wallpaper for your nursery or kids room.

Our wallpapers are printed on LexJet "Peel-n-Stick" repositionable fabric media with durable archival, pigment-based Canon inks printed on a bright white matte finish. The LexJet material and Canon inks give vibrant colors and resist fading. The material is backed with a repositionable adhesive that removes cleanly and easily with no residue. The material is designed for smooth, effortless application to a wide range of smooth, flat surfaces.

For a successful application:

• Walls must be clean and free of dust, grease, dirt, etc. We will send instructions for cleaning your walls with your shipment.
• Walls should be smooth. Avoid textured walls.
• Our standard LexJet product can’t be applied in high humidity areas like bathrooms with a shower stall or bathtub. If you have that condition, please contact us for an alternative product.
• Some paint additives for mildew resistance and stain resistance (such as Teflon) can affect adhesion of the wallpaper to the walls, and should be avoided.
• Avoid Zero VOC paints.

Because the material has some translucency (95% opacity), dark walls may show through on some of our designs, making the ¼” overlap of the panels more visible – especially those designs with a lot of white or light colors. In that case, it is best to repaint the wall white before applying the wallpaper.

If you are at all unsure about your wall surface, please order a sample first to test the appearance and adhesion.

Application

Application is easy as the Peel-n-Stick product can be placed, removed and replaced, as needed. We will send clear instructions for installation, and we are always available to answer your questions. The wallpaper comes in 24-inch wide panels, each panel cut to the length you specify. The panels then overlay by about .25 inch to allow for matching the pattern. Preparation before ordering is important (see below) and will help make your project successful.

The material can be applied to any smooth, clean, dry surface, with the exceptions noted earlier – rough surfaces, greasy or dirty surfaces, Zero VOC paints, and humid areas (such as bathrooms with shower stalls or tubs). Wait at least three weeks after painting. Please wait at least 24 hours after cleaning the wall to ensure it is completely dry.

Preparation Before Ordering

First, request a sample to make sure that the colors are right for your color scheme and that the material adheres well to your wall surface. Samples are 9" x 24" and will show the pattern. Most of the samples will be printed with reduced pattern scale so that more of the pattern variation will be included. The actual wallpaper will be printed with the scale shown in the main pictures in the listing. Please contact us if you want your wallpaper to be printed in a different scale than that pictured – larger or smaller.

Second, measure the width and height (from floor to ceiling) of the area you wish to cover. The height will determine the length of the panels you order. To decide how many panels you need, divide the width of the space by 23.75-inches. Always round up. For example, if your wall is 60 inches wide (60" divided by 23.75" = 2.526) you will need to order 3 panels.

Use the form on this page to choose the number and length of your panels. Please email any questions you have. We want to make sure that your order is just what you need.

Your Order

The panels will be clearly numbered when we send them to you to make your application easy. It’s best to let your wallpaper acclimate to your room humidity for a few days. And, as noted above, wait three weeks after painting.

Returns and Exchanges

We produce each product to order, and therefore returns and exchanges are quite costly. We want you to have a product that you love, so we will work with you before and after your purchase to make sure it is right. Unfortunately, we can't accept returns.