Tiki Torch Deck Mount: 3/4" Pole, Black ABS, Stainless Screws

Tiki Torch Deck Mount - 3/4" Pole - 1 Set.


Proudly Designed and made in the USA.


Tiki Torch Custom Deck Railing Mounts for Tiki Brand Urban Metal Torch 1116037 and other 3/4” outside diameter pole mounted torches.


This mount won’t work itself loose or will it fall over like ground stake mounts.


3-D Printed from ABS that won't rust, peel or fall apart. Mounts hold the pole 1” from the railing surface and the bottom mount has a drain hole to allow water to drain away from the pole bottom preventing rust.

Includes top and bottom brackets and 4 stainless steel wood screws for mounting one torch.

Please message me if you have any questions and I may be able to create a custom solution for you. I have over 75 Tiki Torch mounting designs.

If you have Bamboo Poles; I would recommend one of the two listings below.

https://www.etsy.com/listing/1247326423/tiki-torch-deck-mount-15-pole-black-abs

Tiki Torch Holder - 1.5" Poles-Wood Screw-Deck Mounting Kit-Stainless Wood Screw - 1 Set - Black ABS - Surface Mount - Universal Zip-Tie

https://www.etsy.com/listing/1233395348/tiki-torch-holder-15-poles-wood-screw

Tiki Torch Holder - 1.5" Poles - Wood Screw - Deck Mounting Kit - Stainless Wood Screw - 1 Set - Black ABS - Surface Mount

Designed, Printed and Produced in the USA.

See my reviews for feedback and mounting ideas.

Pipe/Tiki Torch Measuring Guide: Measuring the outside diameter of a pipe is a relatively simple process that can be done using a few common tools. Here are a few steps you can follow to measure the outside diameter of a pipe accurately:

Select the Right Tools: You will need a measuring tape or a caliper to measure the outside diameter of the pipe. A digital caliper can provide more precise measurements.
Clean the Pipe: Make sure the pipe is clean and free from any debris that could affect your measurement.
Position the Pipe: Place the pipe on a flat surface to ensure accurate measurements.
Measure the Diameter:
- Using a Measuring Tape: Wrap the measuring tape around the pipe's circumference. Divide the circumference by pi (π), which is approximately 3.14159, to calculate the outside diameter.
Using a Caliper: If you are using a caliper, open the jaws of the caliper and place them around the pipe, ensuring that the jaws are making contact with the outer edges of the pipe. Take the measurement displayed on the caliper to determine the outside diameter.
Take Multiple Measurements: To ensure accuracy, it's a good idea to take multiple measurements at different points along the length of the pipe and then calculate the average.
Record the Measurement: Note down the measurement for future reference if needed.
By following these steps, you should be able to measure the outside diameter of a pipe accurately.