Once your order has been shipped and the tracking number is showing delivered, please wait another 2-3 days to see if the post office has scanned it as delivered but has not actually delivered yet (some locations do this). If after a few days it is still not received please reach out to Gurumi Supply and your local Post Office as soon as possible. The order will be considered completed. If the buyer does not reach out to Gurumi Supply within 14 days after tracking number shows delivered and the order was not received To avoid a lost package, always double check your mailing address. If the incorrect address is entered, it is not the fault of Gurumi Supply. It is the buyer's responsibility to make sure the address is correct.

There is an issue with my order/ I'm having trouble with my product

If there are any issues with your order please contact Gurumi Supply within 7 days of receiving your order. If you are having trouble using your eyes/noses/washers please reach out to Gurumi Supply within 7 days of receiving your order. Unfortunately, waiting longer could result in a discontinued or sold out product.

What do I need to do if I need to return or exchange an item I purchased?

Please contact Gurumi Supply directly prior to sending item(s) back. All returns and exchanges need to be approved prior. Once approved, the buyer is responsible for any shipping cost to send the item(s) back. A bubble package and tracking number is required. The tracking number must be shared with Gurumi Supply. Once the item(s) have been received and inspected for damaged, a refund for the item(s) may be submitted. If a buyers ships a return/exchange back and it is not in a bubble package and/or no tracking is received, a refund can not be guarantee. Due to loss or damage. If a buyer ships a return/exchange back and postage is due upon receipt, Gurumi Supply will not pay for the postage due and no refund will be issued.

I entered the wrong shipping address, What can I do?

Once an order is placed and it is realized the address is incorrect please contact us as soon as possible. Due to the volume of orders received and/or the holiday season upon us, no correction will be made. Instead the order will be cancelled and a new order will need to be placed with the correct address. Please understand that during the holiday season there is no time to make address corrections on our side. We ask that you double check your shipping address on you profile to make sure it is accurate. Thank you

How do I use my Gurumi Supply Safety Eye Gismo?

To use your Gismo: Lay it flat on surface. Place your washer over the needed sized hole. Place your eye in the correct spot on your creation. Line up the shank of the eye to the hole of your washer. Once aligned push down to attach initially then again to fully snap in place to handmade creation. Video available in Etsy post and on our Instagram page: Instagram.com/gurumisupply

Some eyes I ordered arrived with 2 sets of washers, How do I use them?

Some of the larger round eyes will arrive to you with 2 sets of washers. One set is a harder washer usually in a white color and the other set is a soft washer usually in a brown or gray color. Only one set of washers need to be used to attach the eyes. Typically the white washers will need more effort to attach by hand. These can be attached much easier with our Safety Eye Gismo found in the tool category. The brown/gray washers are considered soft washers and can be attach with much less effort by hand and no tool.

How many eyes or noses am I getting in each package?

Each post will state how many pairs of eyes or how many noses are in each pack. If the count is not in the title of the post, it will be in the description. All eyes are sold in sets or pair(s) and have washers. Example: 1 pair of eyes = 2 eyes and 2 washers, 5 pairs of eyes = 10 eyes and 10 washers 2 count of noses = 2 noses and 2 washers

Some of my eyes (trapezoid or 3D shaped eyes) came with hard washers (machine washers), how do I use them and attach them?

About some washers: These washers are very tight and were designed for machine application to fit snug. There are a few methods to assist. - Tool available in Gurumi Supply shop - Safety Eye Gismo - Warming up some water and placing the washers in there so they can soften up a little bit - Take a nail file or screw driver to open the hole a little bit, or small slit on the inside of the hole - Placing a cloth over the eye and the washer and lightly hit it with a hammer & socket to secure it in place - Use tweezers to hold washer and lightly heat up by fire, the hole will become slightly bigger as it heats up - Use a metal washer as leverage to push down on plastic washer to attach to eye

Covid-19 Shipping Internationally

***NOTICE*** Due to the current pandemic worldwide, any international orders at this time will be filled however, there maybe delays. Please understand that due to the current pandemic internationally shipped orders are having major delays. Please accept that Gurumi Supply does not control the timing or processes of mailing and shipping once an order leaves our possession prior to placing your order.

How do I apply a coupon code to my order? What if my coupon code doesn't work?

To apply a coupon code on Etsy, go to your cart, click "Apply shop coupon codes" beneath your item list, enter the code, and click "Apply". This must be done on the checkout page before finalizing payment. You must be signed into an Etsy account to use coupons. There could be a couple of reasons your coupon code is not working: - Please note that in order to use a coupon code you must be signed into your Etsy account. Coupon codes do not work with Guest sign-in. - Your coupon code has expired and is no longer valid.

Report this item to Etsy

Only 6 left and in 4 carts

Price:$2.59

Limited Quantity! 30mm Solid Black Safety Noses with Washer - 1 ct - Amigurumi / Dogs / Bears / Creations / Animal / Toys / Crochet

Name: Limited Quantity! 30mm Solid Black Safety Noses with Washer - 1 ct - Amigurumi / Dogs / Bears / Creations / Animal / Toys / Crochet
Brand: GurumiSupply
SKU: 822164556
Price: 2.59 USD
Availability: InStock
Rating: 4.5 (65 reviews)

GurumiSupply

Arrives soon! Get it by Sep 28-Oct 5 if you order today

Returns accepted

Quantity

You can only make an offer when buying a single item

Star Seller. This seller consistently earned 5-star reviews, shipped on time, and replied quickly to any messages they received.

Highlights

Sourced by GurumiSupply
Supplies for making crafts
Materials: plastic, metal
Length: 30 millimeters

This item is being discontinued! Limited quantity in stock!

Give your stuffed animal a sense of smell with one of these terrific noses. Not just for the average dog but a great addition to any animal or pet; teddy bears, puppy, kitty, bunny, bears, deer, sloth, etc.

These black noses are the perfect finishing touch to any animal craft. They have a textured feeling and come with a straight shank back and metal washer for attaching.

Nose color: Textured Black
Size: 25x30mm
Quantity: 1 Count

To attach metal washer to shank, place the washer with the points facing away. Once the washer is attached, the points will grab or dig into the shank making removal difficult.

Please allow for slight color variances due to the color of your computer monitor and photo lighting

Warning! These eyes are small and could cause choking. Keep away from babies and small children.

Thank you for stopping by Gurumi Supply and please contact us for any questions or custom orders.

Order today to get by Sep 28-Oct 5
Returns accepted within 14 days
Cost to ship: $6.07
Ships from: Yucaipa, CA

There was a problem calculating your shipping. Please try again.

Country

Zip code

Please enter a valid zip code.

Etsy Purchase Protection
Shop confidently on Etsy knowing if something goes wrong with an order, we've got your back for all eligible purchases — see program terms

Etsy invests in climate solutions like electric trucks and carbon offsets for every delivery. See how