Alphabet Letter Cubes for Glow forge - Parties, Weddings, Bridal Showers and Home Decor - Laser Cut Files box initials character svg

Laser Cut Files - Not the physical product - no items will be shipped.
Glowforge Ready
Digital download 3 Zipped Files - (1 with SVG Files) + (1 with marketing images) + (1 with a material gauge) + Assembly Instructions.

****If you need other file types, please message and I will convert for your wood thickness.****

The zip file includes the full alphabet of letters to make cube stacks using a laser cutter.
Files are designed for 16 different thicknesses between 0.118in (3mm) and 0.25in
including: 3mm, 0.125in, 0.13in, 0.14in, 0.15in, 0.16in, 0.17in, 0.18in, 0.19in, 0.20in, 0.21in, 0.22in, 0.23in, 6mm, 0.24in, 0.25in.

Once you unzip the file you will see folders for each of the sizes above.
Inside each folder are files for the end plates (base and top, same file) and all the letters.

You can make a box (each a 10.75in cube) out of 6 pieces (2 x end plates and 4 letters)
The letters must be assembled in the same direction (not reversed or turned upside down). otherwise they won't go together.
These may be glued together and fitted into the lower end plate. It is intended to be a tight press fit.
The upper end plate can then be fitted onto the letters, also intended to be a tight press fit.

A material gauge is included in the files to help you pick the correct file for the wood thickness you have. Please cut this out using the same settings you would use for cutting the boxes.
The gauge can be used on screen as well to ensure the file has imported at the correct scale (the gauge is 2in across by 10in high). There is also a 1in square in each file that can be used to check the import scale (please set it's color (orange) to ignore.

If in any doubt please get in touch.

Colors:
Red is cut and orange is ignore

For material planning, a stack of 4 boxes has been sized to ensure you can make it from a single 8' x 4' sheet.
You will need to have the sheet cut into 24off 11in square pieces (each piece fits within 10.75in).
This has been calculated so it can all be cut on the Glowforge Basic or Plus, but if you have a larger laser cutter you can lay as many pieces out as needed to make use of your cutting area and wood size.


DIGITAL DOWNLOAD ONLY [NO PHYSICAL ITEM WILL BE SHIPPED].
Suggested use for Laser Cutting, using Glowforge or similar.

This listing is for an INSTANT DOWNLOAD. You can easily create your own projects. Can be used with any software that accept SVG files. Typical include Cricut Design Space, Silhouette Studio, Inkscape, Glowforge, Lightburn, RDWorks, Adobe Illustrator.

Files can be downloaded instantly. No physical item will be delivered and there are no refunds for digital files.
You may use these files to make products to sell yourself, however you may not resell or modify the files for profit.

Please make sure the program/software you are using accepts SVG files.