𝗢𝘂𝗿 𝗽𝗼𝗽𝘂𝗹𝗮𝗿 𝗥𝗢𝗨𝗡𝗗 𝗯𝗶𝗿𝗱 𝗯𝗼𝘅 𝗽𝗿𝗼𝘁𝗲𝗰𝘁𝗼𝗿 𝗽𝗹𝗮𝘁𝗲𝘀.

These are made from metal, we see many vendors offering wood or even plastic options which do not offer any protection from squirrels or rats.

Though we've moved on from the days when we would cut & drill these out individually, today we have the help of our CNC, they are still all finished by hand, ensuring they leave us without any burrs or sharp edges.

Protect bird nests from predation caused by other birds and animals pecking or chewing the hole bigger to get to the young.

Available in 3 different sizes, 25mm hole, 28mm hole and a 32mm hole. That suit different birds. You can either match them to your current box holes or if you want to change the occupancy of a box with a larger hole.

𝟮𝟱𝗺𝗺 𝗵𝗼𝗹𝗲𝘀 𝗮𝗿𝗲 𝗳𝗮𝘃𝗼𝘂𝗿𝗲𝗱 𝗯𝘆 𝘀𝗺𝗮𝗹𝗹𝗲𝗿 𝗯𝗶𝗿𝗱𝘀 𝘀𝘂𝗰𝗵 𝗮𝘀 𝗯𝗹𝘂𝗲𝘁𝗶𝘁𝘀.
𝟮𝟴𝗺𝗺 𝗵𝗼𝗹𝗲𝘀 𝗮𝗿𝗲 𝗳𝗼𝗿 𝗹𝗮𝗿𝗴𝗲𝗿 𝗯𝗶𝗿𝗱𝘀 𝘀𝘂𝗰𝗵 𝗮𝘀 𝗚𝗿𝗲𝗮𝘁 𝗧𝗶𝘁𝘀
𝟯𝟮𝗺𝗺 𝗵𝗼𝗹𝗲𝘀 𝗮𝗿𝗲 𝘁𝘆𝗽𝗶𝗰𝗮𝗹𝗹𝘆 𝗳𝗼𝗿 𝗡𝘂𝘁𝗵𝗮𝘁𝗰𝗵 𝗮𝗻𝗱 𝘀𝗶𝗺𝗶𝗹𝗮𝗿 𝘀𝗶𝘇𝗲 𝗯𝗶𝗿𝗱𝘀.

These simple plates are made from aluminium, so they won't rust, simply screw over the holes with the screws provided.


Originally all cut and punched by hand, these are now created on CNC and then finished by hand.

Yes, you can buy cheaper but plastic or wood protectors are not strong enough to deter a determined squirrel, rat, woodpecker etc.

𝗗𝗶𝗺𝗲𝗻𝘀𝗶𝗼𝗻𝘀

Round Plates are approx 75mm (3") diameter

Bulk orders with or without engraved numbers are available.

Most of our products are created via customer enquiries, if you need something that isn't shown here, please reach out to us via direct from here or use our CNC Cutting Product on this platform.

See our other similar items in this category here: https://www.etsy.com/shop/SIUKProducts?section_id=41260357
Please see our store for our other items: https://www.etsy.com/shop/SIUKProducts

We do our best to minimise plastic in our packaging. excluding any tape to secure the outside, sometimes if we are sent something in packaging that we can re-use, we will use this rather than bin it, in most instances these plates are sent out in 100% paper envelopes.

𝗛𝗼𝘄 𝗶𝘁𝘀 𝗺𝗮𝗱𝗲?

This Part begins its life in a full sheet of aluminium.
It then gets cut into a flat shape cutout, using our in-house CNC cutting machine
After this, it is folded by hand on our manual press brake.
We check for any edge blemishes or sharp edges and deburr where required.