50 - 54 mm Mirror Design, Two Finishes on this Open Compact Cat Mirror , Digital Embroidery, Instant Download, Beginner Friendly, 2 - 2.25 inch
Please be sure to order the correct size mirrors for this design - it will not hold 3 inch mirrors.
There are two finishes: raw edge open compact mirror design (no cover) not suitable to be made in fabric.
and a Satin edge finish, which uses Crafty Foam for stability and fabric. This is a great option if your cutting needs to be covered (if you know you know)
Can be made using vinyl, marine vinyl, leatherette, leather, faux Leather or fabric!
--------This is a digital embroidery downloadable pattern for an embroidery machine ONLY--------
This is a plain open compact design and has no pattern or writing.
This requires a compact mirror of 2 - 2.25 inches (the bigger is better) & a plastic connector - you can find these both here in my shop
Mirror: https://liseydesigns.etsy.com/listing/1694495891
Plastic Key Ring Connectors here : https://liseydesigns.etsy.com/listing/1697618542 if you require more, let me know, I will get a better price for you!
If you prefer something other than the super dooper connectors I supply, then Kam snaps will work and rotate the covered compact top
You will need a hole punch and a hand held snap press if adding the snaps to the design
ALL MADE IN THE HOOP - NO EXTRA SEWING NEEDED.
Finished Case is 3 x 3.75 inches when put together, so not overly big, but by no means small.
The mirror will be uncovered
This design looks great on plain leatherette, patterned or plain vinyl or even fabric!
.
............................... Please note this is not for the finished item.......................................
.
This is stitched in one hooping
You will need
Stabiliser – medium weight tear away or
These are both stitched in one hooping
You will need
Stabiliser – medium weight tear away or Water soluble
4x4 Hoop
2 – 2.25 inch compact mirror (available in our Etsy shop)
1 plastic connector (available in our Etsy shop)
For Raw Edge: Vinyl x 2 pieces 4x4 inches for front & back
For Fabric Satin Edge: 1 piece of Crafty Foam 4x4 inches & 2 pieces of fabric 4x4 inches
One piece of scrap material or vinyl 3x3 inches for back of mirror
Embroidery thread – Just one with matching bobbin thread
Tape
4 double sided foam pads for cushioning on back of mirror
Craft knife, Scissors, Hole punch
Super quick and VERY easy! Match the top and bobbin threads for the final outline.
This is the fabric version, so will finish with a satin edge
You will need to use a craft knife to cut out the centre of mirror placement
Super quick and VERY easy! Match the top and bobbin threads for the final outline.
Contains a zipped file which inside has all formats and easy to follow instructions
Formats included: PES, JEF, EXP, DST, HUS, VIP, VP3 & XXX
Sold on a hobby licence, if you would like a commercial license for this design, you will find the license in my Etsy Shop