3D print your own particle accelerator and CRT Emitters for cyclotron prop as seen in the new movie Ghostbusters Afterlife with as much precision and details available.

If you are printing the cyclotron, a large bed is preferred to avoid too much filler and sanding. But the 4 part version can be printed on any regular sized bed.
Files for the cyclotron are part of the free "q-pack" project.
https://github.com/mr-kiou/q-pack/tree/MK3/AFTERLIFE/EGON_PHOEBE_PROTONPACK/SHELL_UPDATE/Cyclotron

The CRT Emitters will look better printed in resin, but should work just fine in FDM.

To assemble you will need : 16 X 20mm M3 machine screws or equivalent ( anything you can find that match the prop), 4.2mm OD brass insert for the M3 ( you can also use the non insert version, simply use your M3).

For the CRT Emitter, you will need 14mm OD ( 12mm or 11mm ID) clear tubing. A printable version is also included.

The CRT Emitter can be used on their own with your current cyclotron cast in resin for better accuracy.
The cake will need 13 X M3 the size you want and a nut to keep them in place and 32 X M3 Hex Socket Button Head of maximum 20MM


If you need help for assembly or printing feel free to send me a message on facebook, or Instagram (@mr_kiou).

EDIT : Added insctruction
EDIT 2 : this will be updated with the new synchronous generator parts .
EDIT 3 : Cake now available in the google drive link

All the tips,tricks and files can also be found on the FB group for the 3D printed ghostbusters props :
https://www.facebook.com/groups/3DprintedGBprops/