BUDGET Modded Gamecube Controller for Smash Bros. Melee and Ultimate | Snapback | MX Cherry Triggers | Tactile Z

This will be a new black Smash Ultimate Gamecube controller or A grade used and refurbished parts. All controllers will have an OEM T3 motherboard (NOT PHOB) and functional modifications geared towards competitive Smash Bros Melee and Ultimate. This controller is a budget build that includes some basics, like the no-reset snapback module and the much loved MX Cherry triggers.

These controllers are made to order , so be aware that they controllers have a 3-5 week production time.

NOTE:
Addons, Helpful links, warranty policy and international shipping policy can be found near the bottom of the description!

----------------------------------------
Trigger Mods
----
Melee MX
A mounted mechanical keyboard switch replaces the spring mechanism for the R or L triggers making a lighter and more satisfying tactile feedback.

The Gamecube controller has two trigger inputs:
1. analog - light shield and optimal L cancel
2. digital - normal shield, wavedash, air dodge, techroll

The MX trigger mod can only be mapped to one type of input. So for the ideal trigger layout is One digital MX trigger and one traditional spring trigger that retains both analog and digital inputs. Normally, you'll be putting the MX trigger on the side that you wavedash with. Just know that you won't be able to light shield or analog L cancel with this trigger, so your personal trigger layout may not be compatible with using one digital only trigger.

If for some reason you want double digital MX triggers or only one trigger mod, then send me a message.
Comes with:
1 Digital MX Cherry trigger
1 FIRES Trigger mod

Please specify which trigger you want the MX Cherry Trigger mod and FIRES Trigger mod in the personalization field.
---
Ultimate MX
The most optimal combination of MX trigger mods for Smash Ultimate. Ultimate registers the analog trigger input as a digital input and doesn't use the trigger's actual digital input. Yes, it is confusing.
Comes with:
2 MX Cherry triggers wired to the analog signal.

-$20 Trigger addon for Ultimate MX Builds-
If you want to use this controller for other games, then you will want the triggers to be wired for the trigger press to register as both analog and digital inputs. This will allow it to work as it should in Ultimate with the analog signal and allow the digital trigger inputs to be recognized in other games. I will add a custom addon to your order. Just send me a message after you place your order!
---
No Trigger Mod
No mods are done and the OEM springs take roughly 150 grams of force to press. This is a reference point for the force required to press a trigger.
-
FIRES Triggers Mod
New springs with less resistance are installed, and the triggers are stabilized with the PTFE bearing tape to help smooth out the trigger motion and eliminate trigger jams. Furthermore, I lightly lubricate the inside sections of the trigger to further improve smoothness.

Normally, FIRES triggers are around 55 grams of force but I find this is too light and the trigger snaps back to neutral too slow. So I use additional o-rings to bring the tension to roughly 80 grams of force needed to press the trigger.
-
Trimmed and Lubed Triggers
THE SPRINGS ARE NO LONGER TRIMMED but the name will remain the same since Etsy makes it too time consuming to update listings. I now use Cardosi springs which feel the same and speed up the process.

Cardosi springs take roughly 120 grams of force to press. The triggers will then be lubricated with a dry silicone lubricant and the inside sections will be lightly lubricated with a PTFE lube to further improve the feel without destroying the silicone pads.

----------------------------------------
EXTRAS

No-reset snapback module
An 8 switch module (4 vertical & 4 horizontal) with adjustable capacitance to eliminate snapback.
-
Tactile Z
The original Z switch is swapped out with a more tactile, clicky press. The tactile Z switch does take more force to press. An OEM switch from an Ulitmate controller is roughly 60-70 grams of force to press without the metal spring, while the tactile Z is around 90 grams of force without the metal spring.

The life cycle of a tactile Z is a bit lower than an OEM. Tactile Z's are rated for a million cycles while the OEM Z's are rated for 3 million. So they won't last quite as long as OEM but they can be easily swapped out by me or another modder when they die.

All controllers come with a bent metal spring so it's not too hard to press Z unless you request that the spring be taken out.
----------------------------------------
--Addons--
These are mods that I couldn't include in the dropdown but can be added to your order by request with a custom listing. They are not included in the "All Extras" option. Please message me about the bald & lettered buttons, black c-sticks, adapters and shells before ordering to see what I have in stock.

Notches for Melee
Wavedash notches: $40
I'm only including Wavedash notches as an option until I'm more comfortable notching on OEMs.
-
Mouseclick Z - $35
The best option for Z jump. It offers a very satisfying click that requires about 60 grams of force to press. The switch is also rated for 5 million cycles, beating out the life span of the OEM Z switch.

There are some cons, though. First and foremost, the switch is mounted in place with a resin bracket and adhesives. This means that the switch can shift position over time and will need to be adjusted or replaced. Second, it is not compatible with resin Z buttons. Resin Z buttons are usually too thick and I will only use OEM Z buttons when installing the mod. The third con is that if you hammer on your Z too hard, you'll kill the switch much faster than 5 million cycles.
-
-Digital Triggers - $20 - controllers with Ultimate MX triggers
If you want to use this controller for other games, then you will want the triggers to be wired for the trigger press to register as both analog and digital inputs. This will allow it to work as it should in Ultimate with the analog signal and allow the digital trigger inputs to be recognized in other games.
-
Bald buttons & Lettered buttons - $35
I keep a limited stock bald buttons done by ToastyTilapia and lettered buttons by Senor Retro. Pictures in listings may not reflect my actual stock, so send me a message if you'd like to see them.

These button sets include ABXYStart + Z + Dpad.
If ordered with Mouseclick Z, I will use an OEM purple Z but the resin Z will be sent with the controller.
-
Black C-Stick - $15
These are high quality black c-sticks made by SmashProof. (CURRENTLY DISCONTINUED UNTIL I CAN FIND A CONSISTENT SUPPLIER)
-
Cell Rumble - $25
Replace the original rumble motor with a cellphone rumble. It's a more subtle rumble that won't mess with your inputs and activates slightly faster than the original motor. The replacement rumble bracket is made out of a strong nylon.
-
Split D-Pad - $20
This particular design splits the D-pad into 4 separate pieces that sit on top of the rubber pad. This eliminates savestate mis-inputs in Training Mode and Slippi chat.
You can view the source files here: https://github.com/HandHeldLegend/HHL-GameCube-Parts
-
Torx Screws - $15
Swap out the original controller screws with more durable Torx screws. They're less likely to strip but they can also be overtightened more easily, so be careful. Another caution: any controller modder that works on your controller after sale will secretly hate both of us, especially if they forgot to pack their Torx screwdrivers.
-
Trigger stoppers - Free with any controller order upon request
Smash Ultimate reads trigger inputs when the trigger is press about 50% of the way down. The trigger stoppers stop the trigger at that point, so you're actually bottoming out your trigger when it's registering an input. This mod is intended for Smash Ultimate players only.
-
Tall & short trigger plugs - Free with any controller order upon request
Tall trigger plugs sit directly on the digital pad, so there's no analog slider movement. Intended for wavedash or shield triggers. Ultimate players CAN request this but the digital trigger addon is required for the triggers to work. This plug does increase the difficulty to press the trigger by quite a bit.

Short trigger plugs restrict a lot of the trigger's movement but still allows for an analog input. Short trigger plugs can be installed to both triggers without any drawbacks.
-
Adapter - $65
I keep a limited stock of Lossless adapters by Input Integrity. These are some of the best adapters available.
SHELLS
MELEE PLAYERS: I CANNOT GUARENTEE SHIELD DROP VALUES WITHOUT SHIELD DROP NOTCHES IF YOU CHANGE THE SHELL!
You may choose to add a different color shell for an additional cost. Please note that these shells are used but I will be as accurate as possible when describing the state of the shells that I have.

JP White shells: You have the choice of using the entire JP White controller to be modded or just the shell with parts from a brand new controller. I will use the cable since they're often in good condition and the JP White colored buttons and sticks, unless requested otherwise.

JP White Conversion - $20
The internals along with the shell/buttons will be used to make your controller.

JP White Shell - $50
Use just the JP White shell with internals from a new black Smash Ultimate controller. Cable and the JP white colored buttons/stick will be used unless requested otherwise.

Non JP White Shells
At the moment, I'm not offering the same deal as the JP Whites for the other shells. It's too difficult to consistently source good condition T3 controllers in these colors for a decent price. So until I get a good supply, this means the controller will still use the internals from a brand new controller but will have the color of shell that you want.
**Due to the rusty plugs on the original controllers, I won't be using them in the build. Instead, I will use the plug from the black Ultimate controller. So if you'd like me to take off the black plug cover and move the emerald, indigo, or orange plug cover to the new cable it will be an extra $20**

Emerald - $35
Indigo - $25
Spice Orange - $25
----------------------------------------
WARRANTY POLICY:
Every controller I work on is covered by a basic warranty for 90 days after sale.
If something does not work as advertised or malfunctions, then the shipping & repairs will be covered by me.
This is excluding international orders. Any international order placed in 2023 on will require the buyer to cover the cost of shipping both ways.

After 90 days of sale:
Repairs will be free for 1 year after the sale but shipping costs both ways will be covered by the buyer.

Things NOT covered under this policy:
1. Damage caused by mistreatment. Such as any water damage or damage from a controller being thrown.
2. Replacement of degraded potentiometers
3. Snapback capacitor recalibration

----------------------------------------
INTERNATIONAL BUYERS
In order for me to be able to sell my work worldwide, please know that you will be responsible for the shipping costs should your controller need to be repaired. Shipping back and forth will take a long time!

Starting 2024:
I will no longer be offering standard international shipping rates except to Canada. Due to frequent issues with Etsy's international shipping partner and the USPS international shipping, I will be using UPS exclusively for international orders. This unfortunately means I have to charge higher shipping rates for a more positive experience for both of us.

YOU WILL BE RESPONSIBLE FOR ALL IMPORT TAXES. THIS CAN BE UP TO 30%+ OF YOUR ORDER PRICE.

CANADIAN BUYERS: I can't enable standard international shipping just for your country. Please reach out for a partial refund of the shipping cost if you'd like standard international shipping instead of expedited.
---------------------------------------
---------------------------------------
HELPFUL LINKS
A document filled with helpful information to refer back to once you get your Phob:
https://mayhem.shop/blogs/guides/phob-post-purchase-support-document

All my socials:
https://mayhem.shop/pages/socials

My Discord server:
https://discord.com/invite/ZcAu7VKaWK

Phob calibration document:
https://github.com/PhobGCC/PhobGCC-doc/blob/main/For_Users/Phob_Calibration_Guide_Latest.md