Lobster / Crawfish Keychain STL – Cute Crayfish 3D Print Figure – Printable Keychain or Figurine – No AMS – Commercial License

Crawfish / Lobster Keychain STL – Cute Crayfish 3D Print Figure – Printable Keychain or Figurine

A fun little crustacean companion you can print, carry, or scale up for display! This detailed crawfish / lobster / crayfish STL design works great as a 3D printed keychain, desk toy, or small collectible figure. Perfect for seafood lovers, Cajun-themed prints, coastal gifts, market sellers, and craft fair items, this printable crustacean makes a unique addition to any 3D print collection. Print it small as a durable keychain or scale it up into a fun lobster or crawfish display figure for your desk, shelf, or workspace.

Lobster / Crawfish Listing Features:
- Detailed Crawfish / Lobster Figure
- Optional Keychain Loop Version included
- Scalable design – print small as a keychain or scale up as a desk figure
- No AMS required – easy single-color print
- Commercial License included – sell your prints freely

Licensing:
Want to sell your creations? You’re covered! This STL file comes with a life-time commercial license, so you can print and sell with confidence. With this file, you're free to print and sell your finished prints without restriction—ideal for artists, small businesses, and online sellers. Reselling or sharing of digital files is prohibited.

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets. For decoration purposes only.
Perfect For:
- Keychains
- Desk toys
- Seafood lovers
- Cajun gifts
- Market sellers
- 3D printed collectibles

Whether you print it tiny for your keys or scale it up into a bold desk buddy, this little crawfish is ready for your next print!

3D printing settings
Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm layer height Standard print quality settings. Filament used was PLA . Plate used was Bambu Textured PEI Plate.

Adding variable height, ironing or smaller layer heights will decrease the visibility of any lines even more than what is shown in the photos.

----You must use extreme caution when removing the supports so you do not break the antennae----

STLs are provided in orientation that I used for printing. You may need to experiment with orientation with the settings you choose and the printer you have.

If you have issues with the eyes fitting, I suggest scaling the eyes to 99.5% in your slicer or adjust as needed. They are very small and will require precision when printing.

Dimensions at 100% Size:
Height: Approx 2.30” or 2.13” without Loop
Width: Approx 1.71"
Depth: Approx 2.95"

Recommended Print Settings:
- Supports – YES
- Support Type - TREE HYBRID
- Supports on Build Plate Only
- Threshold Angle - 30 degrees
- Remove Small Overhangs - YES
- Brim – AUTO OUTER – Only on small pieces or if you have adhesion issues
- Top Z-Distance - .28 - IMPORTANT
- Bottom Z-Distance - .28
- Layer Height – 0.2mm or smaller
- Nozzle Size – 0.4 or smaller- Seam – position depends on piece and orientation on the plate
- Infill – 15%+
- Wall Loops – 4+ IMPORTANT