DynamiVise PCB - Build your own Modded Lovesqueeze Compressor Pedal!

The Dynami Vise is a compressor pedal based on the boutique Rothwell Lovesqueeze
from the UK. It is a natural, transparent sounding compressor that preserves your tone
while boosting the low-level nuances of your playing by up to 20dB. It’s very low noise
floor won’t add extra hum or hiss to your tone, as some other vintage compressor
pedal designs do. It’s ability to operate at 9v (or up to18v for more headroom) makes
it great for bass as well as guitar. This is the comp that will convert some of the
‘I don’t like compressors’ players.

One enhancement made to the original circuit is the addition of a release control
internal trimpot - turning the trimpot clockwise will yield a faster release time.

Download build guide here:
https://www.ontheroadeffects.com/buildguides/DynamiVise_v1.2_BuildGuide.pdf

ALL OTRFX BUILD GUDES AVAILABLE ON OUR WEBSITE HERE:
https://www.ontheroadeffects.com/pcbs

OTRFX PCB's are designed with the intermediate DIY pedal builder in mind. If you have never built a pedal before, you may want to start with a full kit designed with new pedal builders in mind. Listing is for PCB & build guide PDF only.