General Finishes Enduro Pigmented Poly is a high solids pigmented finish. It is ideal for cabinets and millwork. Stocked in Black and White, custom colors are available upon request. White and Clear can be used as tint bases to achieve endless colors. For non architectural use. Can be used with General Finishes Glaze Effects.

Colors: White, Black, (Custom Available upon request with an upcharge)
Water or Oil: Water Based
Ambering: No

Sheens:
White - Flat (10 or less) Satin (25-35) Semi-Gloss (50-60) Gloss (70+)
Black - Satin (25-35) Semi-Gloss (50-60)

Interior/Exterior: Interior Only
Product Type: Urethane/ Acrylic Blend

Sizes: 
White - Gallons, 5 Gallon Pails, 55 Gallon Drums
Black - Gallons, 5 Gallon Pails

Coats (#): 3 coats
 
Can Sizes: 
White - Quarts of Satin, Gallons, 5 Gallon Pails, 55 Gallon Drums
Black - Gallons, 5 Gallon Pails

Coverage: 110 sq. ft/quart, 450 sq. ft/gallon
Viscosity: 60-80 sec
Application Method: Spray designed
Sprayable: Yes
Spray Tip Sizes: .043 -.051 tip, No. 9 -10 air cap.

DURABILITY
Durability (Highest, High, Medium, Low): High
Hardness (Koeing): White 59 / Black 62
Wear (Taber): White 109.8 mg loss / Black 105.4 mg loss
Water (5 max): 5
Chemical (105 max): White 88 / Black 92

DRY TIME
Dry Time to Touch: 3 min
Dry Time to Re-coat: 2 hr
Dry Time Before Light Use: 7-10 days 
Dry Time Until Cured: 21 days 

TECHNICAL DATA
Viscosity: Thick
Viscosity: 600-800 cPs
Weight Solids (%): White 44% / Black 28%
VOC: White <240 g/L / Black <240 g/L
Topcoat Recommendation: All General Finishes waterbased topcoats